DIME - Sample Record for DIME Sample ID 2021-04-29-11

DIME » All Projects » Project - DEA: 081G0104 » Sample 2021-04-29-11 » Sample Details

Sample Record

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2021-04-29-11

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 215149 DEA: 081G0104 EFIS: 0815000106
DIST-CO-RTE-PM	08-SBD-62-124.8/142.0
Award Date	10/21/2020
Closeout Date	01/18/2022
Work Description	PLACE RHMA-G, HMA, STRUCTURAL CONCRETE & ROCK SLOPE PROTECTION.
Location Description	SAN BERNARDINO COUNTY AT VARIOUS LOCATIONS FROM 1.8 MILES WEST OF ROUTE 95 TO 0.3 MILE WEST OF PARKER DAM ROAD.
QA Service Level	1 (Verified on 01/28/2021)

Sample Information

Sample Taken Date	04/29/2021	Sample Unique Key	11
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/30/2021
Sample type	Verification	A brief description of the sample	PSUE 3/4" HMA-A-SP R25 0.5% LAS
The quantity of what the sample constitutes	10 Bags of Agg., 1 Bag of RAP, 2 Bags of Coldfeed	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Kevin	Last name of sampler or witnessed by	Oluoha
Title of sampler		Telephone number of sampler
Laboratory sample identification	0249A-21	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Granite Indio	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0072
The fabricator's/manufacturer's product name for the sample	3/4 HMA-A-SP R25	The fabricator/manufacturer designation for the sample
The plant number	1535	A detailed description of where the material sample was collected	Belt Cut at Granite Indio Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2021-04-29-11-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Satish Jain/Juan Leroy, CT D08 - Fontana Southern Regional Laboratory	05/04/2021	Satish Jain	Yes	05/18/2021	Combined Virgin Aggregate Gradation
2021-04-29-11-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	05/05/2021	Satish Jain	Yes	05/18/2021
2021-04-29-11-4	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory	05/05/2021	Satish Jain	Yes	05/18/2021
2021-04-29-11-5	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory	05/05/2021	Satish Jain	Yes	05/18/2021
2021-04-29-11-6	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	05/05/2021	Satish Jain	Yes	05/18/2021
2021-04-29-11-7	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	05/05/2021	Satish Jain	Yes	05/18/2021
2021-04-29-11-8	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	05/05/2021	Satish Jain	Yes	05/18/2021
2021-04-29-11-9	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	05/06/2021	Satish Jain	Yes	05/18/2021	Rap Gradation After Ignition
2021-04-29-11-10	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Satish Jain/Juan Leroy, CT D08 - Fontana Southern Regional Laboratory	05/06/2021	Satish Jain	Yes	05/18/2021	Combined RAP/Virgin Aggregate Gradation W/Correlation Factors Applied
2021-04-29-11-11	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	05/05/2021	Satish Jain	Yes	05/18/2021

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-04-29-11-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-04-29-11-3 AASHTO T85-13 (Verified)
DIME Test ID: 2021-04-29-11-4 AASHTO T84-14 (Verified)
DIME Test ID: 2021-04-29-11-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-04-29-11-6 AASHTO T176-08 (Verified)
DIME Test ID: 2021-04-29-11-7 ASTM D4791-10 (Verified)
DIME Test ID: 2021-04-29-11-8 AASHTO T304-11 (Verified)
DIME Test ID: 2021-04-29-11-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2021-04-29-11-10 CTM 202-November 2011 (Verified)
DIME Test ID: 2021-04-29-11-11 AASHTO T335-09r13 (Verified)