Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2021-04-22-1
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 214579
DEA: 010B0904
EFIS: 0100020444 |
|---|
| DIST-CO-RTE-PM | 01-DN-101-8.2/8.7 |
|---|
| Award Date | 04/21/2020 |
|---|
| Closeout Date | Not set |
|---|
| Work Description | BRIDGE REPLACEMENT |
|---|
| Location Description | DEL NORTE COUNTY NEAR KLAMATH AT PANTHER CREEK BRIDGE AND AT HUNTER CREEK BRIDGE |
|---|
| QA Service Level | 1 (Verified on 03/02/2020) |
|---|
Sample Information
| Sample Taken Date | 04/22/2021 |
Sample Unique Key | 1 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 05/11/2021 |
|---|
| Sample type | Acceptance |
A brief description of the sample | 1 1/8" A563 Gr DH Nuts |
|---|
| The quantity of what the sample constitutes | 120 |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | Kevin |
Last name of sampler or witnessed by | Muser |
|---|
| Title of sampler | QA |
Telephone number of sampler | 9165170532 |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Thompson Metal Fab |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | S19-056-21 |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
|---|
| Heat Number(s) | 100897555 |
Nut Mfg. Lot Number(s) | 432156A |
|---|
| Washer Mfg. Lot Number(s) | |
Bolt Specification | N/A |
|---|
| Bolt Length(s) | |
Nut Specification | A563 |
|---|
| Washer Specification | N/A |
Finish | HDG |
|---|
| Diameter/Size | 1.125 |
Bolt Mfg. Lot Number | N/A |
|---|
| Rocap Test Requirement(s) | No |
Lubricant Requirements(s) | Yes |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2021-04-22-1-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/11/2021 | spaine | Yes | 05/20/2021 | Nut Proof Load |
|
| 2021-04-22-1-2 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/12/2021 | Steven Paine | Yes | 05/20/2021 | |
|
| 2021-04-22-1-3 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/12/2021 | Steven Paine | Yes | 05/20/2021 | |
|
| 2021-04-22-1-4 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/12/2021 | Steven Paine | Yes | 05/20/2021 | |
|
| 2021-04-22-1-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/12/2021 | Steven Paine | Yes | 05/20/2021 | |
|
| 2021-04-22-1-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/12/2021 | Steven Paine | Yes | 05/20/2021 | |
|
| 2021-04-22-1-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/12/2021 | Steven Paine | Yes | 05/20/2021 | |
|
111845111891111892111893111894111895111896
