Sample Record

Owner Lab

  • CT D03 - Olivehurst Northern Regional Laboratory

DIME Sample ID 2021-03-08-22

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214764
DEA: 032H6404
EFIS: 0317000167
DIST-CO-RTE-PM03-SAC-12,160-0.4/0.9,L10.5/R0.2
Award Date05/20/2020
Closeout Date05/11/2022
Work DescriptionMODIFY SIGNAL AND LIGHTING SYSTEM, PLACE RHMA AND ROADWAY EXCAVATION.
Location DescriptionSACRAMENTO COUNTY NEAR RIO VISTA ON ROUTE 12 FROM 0.6 MILE EAST OF SACRAMENTO RIVER BRIDGE TO 5.2 MILES WEST OF MOKELUMNE RIVER BRIDGE AND ON ROUTE 160 FROM 3.6 MILES NORTH OF THREE MILE SLOUGH BRIDGE TO 2.7 MILES SOUTH OF CIRCLE DRIVE
QA Service Level1 (Verified on 03/24/2020)

Sample Information

Sample Taken Date03/08/2021 Sample Unique Key22
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/09/2021
Sample typeVerification A brief description of the sample3/4" HMA - A w/12% RAP
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byGeorge Reed Personnel (SAMPLER) Last name of sampler or witnessed byUnkown (WITNESS)
Title of sampler Telephone number of sampler
Laboratory sample identificationJMF21-010 Linked DIME Sample ID2021-03-08-21
The fabricator/manufacturer/facility nameGeorge Reed Inc- Clements Batch Plant Transportation Laboratory (TL) NumberNone provided
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number JMF Verification ID JMF3513-2021-46

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-03-08-22-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content) Benjamin Dreher CT D03 - Olivehurst Northern Regional Laboratory04/02/2021Kavon Rastegar
Yes
04/21/2021JMF21-010.
2021-03-08-22-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Benjamin Dreher CT D03 - Olivehurst Northern Regional Laboratory04/02/2021Kavon Rastegar
Yes
04/21/2021JMF21-010.
2021-03-08-22-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Benjamin Dreher CT D03 - Olivehurst Northern Regional Laboratory04/05/2021Kavon Rastegar
Yes
04/21/2021JMF21-010.
2021-03-08-22-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Jeff HerbertCT D03 - Olivehurst Northern Regional Laboratory04/05/2021Kavon Rastegar
Yes
04/21/2021JMF21-010.
2021-03-08-22-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Jeff HerbertCT D03 - Olivehurst Northern Regional Laboratory04/06/2021Kavon Rastegar
Yes
04/22/2021JMF21-010.
2021-03-08-22-6AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)Jeff HerbertCT D03 - Olivehurst Northern Regional Laboratory04/07/2021Kavon Rastegar
Yes
04/22/2021JMF21-010.

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-03-08-22-1 AASHTO T308-10 (Verified)
DIME Test ID: 2021-03-08-22-2 AASHTO T209-12 (Verified)
DIME Test ID: 2021-03-08-22-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2021-03-08-22-4 AASHTO T269-14 (Verified)
DIME Test ID: 2021-03-08-22-5 AASHTO T283-14 (Verified)
DIME Test ID: 2021-03-08-22-6 AASHTO T324-14 (Verified)