DIME - Sample Record for DIME Sample ID 2021-03-05-20

Skip to Main Content

DIME » All Projects » Project - DEA: 033F5404 » Sample 2021-03-05-20 » Sample Details

Sample Record

Owner Lab

CT D03 - North Region Materials Lab

DIME Sample ID 2021-03-05-20

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214492 DEA: 033F5404 EFIS: 0313000136
DIST-CO-RTE-PM	03-SAC-99,160-4.5/5.7,R44.5
Award Date	01/24/2020
Closeout Date	Not set
Work Description	FURNISH PRECAST PRESTRESSED CONCRETE SLAB & PLACE STRUCTURAL CONCRETE.
Location Description	SACRAMENTO COUNTY NEAR GALT ON ROUTE 99 FROM NORTH OF MINGO ROAD TO SOUTH OF ARNO ROAD OVERCROSSING AND IN SACRAMENTO ON ROUTE 160 AT AMERICAN RIVER BRIDGE
QA Service Level	1 (Verified on 10/23/2019)

Sample Information

Sample Taken Date	03/05/2021	Sample Unique Key	20
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	03/08/2021
Sample type	Verification	A brief description of the sample	3/4" (Nominal) Untreated Virgin Aggregate
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Sam Mossallem (Witness)	Last name of sampler or witnessed by	Teichert Personnel (SAMPLER)
Title of sampler	Teichert Personnel	Telephone number of sampler	Unknown
Laboratory sample identification	JMF21-009	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Teichert Perkins - Continuous Plant Dreyer Drum	Transportation Laboratory (TL) Number	C 849135
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA or name of Pit)	91-34-0045::ASPEN IV SOUTH
The fabricator's/manufacturer's product name for the sample	Unknown	The fabricator/manufacturer designation for the sample	Unknown
The plant number	Unknown	A detailed description of where the material sample was collected	Cold Feed
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number	Unknown
Sublot number	Unknown	JMF Verification ID	JMF3513-2021-45

Submitted Tests

DIME Test ID	Test Method	Tester Name	Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments	Actions
2021-03-05-20-1	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Thomas Stinnett	CT D03 - North Region Materials Lab	03/15/2021	Kavon Rastegar	Yes	04/19/2021	JMF21-009.
2021-03-05-20-2	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Thomas Stinnett	CT D03 - North Region Materials Lab	03/18/2021	Kavon Rastegar	Yes	04/19/2021	JMF21-009.
2021-03-05-20-3	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Thomas Stinnett	CT D03 - North Region Materials Lab	03/16/2021	Kavon Rastegar	Yes	04/19/2021	JMF21-009.
2021-03-05-20-4	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Thomas Stinnett	CT D03 - North Region Materials Lab	03/16/2021	Kavon Rastegar	Yes	04/19/2021	JMF21-009.
2021-03-05-20-5	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Thomas Stinnett	CT D03 - North Region Materials Lab	03/16/2021	Kavon Rastegar	Yes	04/19/2021	JMF21-009.
2021-03-05-20-6	CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)	Jeff Herbert	CT D03 - North Region Materials Lab	03/18/2021	Kavon Rastegar	Yes	04/19/2021	JMF21-009. No Plastic (NP)
2021-03-05-20-7	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Thomas Stinnett	CT D03 - North Region Materials Lab	03/30/2021	Kavon Rastegar	Yes	04/19/2021	JMF21-009.
2021-03-05-20-8	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Thomas Stinnett	CT D03 - North Region Materials Lab	03/16/2021	Kavon Rastegar	Yes	04/19/2021	JMF21-009.
2021-03-05-20-9	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Thomas Stinnett	CT D03 - North Region Materials Lab	03/12/2021	Kavon Rastegar	Yes	04/19/2021	JMF21-009.