Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2021-04-13-5
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 214099 DEA: 024F5904 EFIS: 0213000010 |
DIST-CO-RTE-PM | 02-TEH-5-R25.4 |
Award Date | 07/08/2020 |
Closeout Date | Not set |
Work Description | BRIDGE SEISMIC RETROFIT AND SCOUR REPAIR. |
Location Description | TEHAMA COUNTY IN RED BLUFF AT SACRAMENTO RIVER BRIDGE |
QA Service Level | 1 (Verified on 05/07/2019) |
Sample Information
Sample Taken Date | 04/13/2021 |
Sample Unique Key | 5 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 04/16/2021 |
Sample type | Quality Assurance |
A brief description of the sample | 3/4 X 2-1/2 A-325 HSB Assy |
The quantity of what the sample constitutes | 130 ea. |
From where was the sample collected | Fabricator |
First name of sampler or witnessed by | Jason |
Last name of sampler or witnessed by | Gramlick |
Title of sampler | Associate Steel Inspector |
Telephone number of sampler | 7076495471 |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | CK Johnson Industries |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | B-3-336-21 |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | 446296AR |
Heat Number(s) | 100205944 |
Nut Mfg. Lot Number(s) | 439351C |
Washer Mfg. Lot Number(s) | 10615 |
Bolt Specification | A-325 |
Bolt Length(s) | 2-1/2 |
Nut Specification | A-563 |
Washer Specification | F-436 |
Finish | Galv |
Diameter/Size | 3/4 |
Bolt Mfg. Lot Number | 446296A |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2021-04-13-5-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/19/2021 | spaine | Yes | 04/21/2021 | A325 Wedge Tensile | |
2021-04-13-5-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/19/2021 | spaine | Yes | 04/21/2021 | Nut Proof Load | |
2021-04-13-5-3 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 12/31/1969 | Steven Paine | Yes | 04/21/2021 | | |
2021-04-13-5-4 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 12/31/1969 | Steven Paine | Yes | 04/21/2021 | | |
2021-04-13-5-5 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 12/31/1969 | Steven Paine | Yes | 04/21/2021 | | |
2021-04-13-5-6 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 12/31/1969 | Steven Paine | Yes | 04/21/2021 | | |
2021-04-13-5-7 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 12/31/1969 | Steven Paine | Yes | 04/21/2021 | | |
2021-04-13-5-8 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 12/31/1969 | Steven Paine | Yes | 04/21/2021 | | |
2021-04-13-5-9 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 12/31/1969 | Steven Paine | Yes | 04/21/2021 | | |
2021-04-13-5-10 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 12/31/1969 | Steven Paine | Yes | 04/21/2021 | | |
109714109742109764109765109766109767109768109769109770109771