Sample Record

Owner Lab

  • CT D03 - Olivehurst Northern Regional Laboratory

DIME Sample ID 2020-07-23-49

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214618
DEA: 033F99U4
EFIS: 0319000311
DIST-CO-RTE-PM03-SUT-99-39.2/41.4
Award Date05/15/2020
Closeout Date12/13/2023
Work DescriptionWIDEN RDWY, HMA, CRCP, WATER LINE, SIGNALS, & LIGHTING SYSTEM.
Location DescriptionSUTTER COUNTY IN AND NEAR LIVE OAK FROM 0.1 MILE SOUTH OF COLEMAN AVENUE TO NEVADA STREET (NORTH INTERSECTION)
QA Service Level1 (Verified on 03/24/2020)

Sample Information

Sample Taken Date07/23/2020 Sample Unique Key49
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/24/2020
Sample typeVerification A brief description of the sample1/2" HMA - A w/RAP
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byM. Last name of sampler or witnessed byChittenden (WITNESS)
Title of samplerDSG Personnel Telephone number of sampler
Laboratory sample identificationJMF20-032 Linked DIME Sample ID
The fabricator/manufacturer/facility nameDeSilva Gates Aggregates-Marysville Transportation Laboratory (TL) NumberC723296
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot number
Sublot number HMA Mix NumberNot set

JMF Information

Verification IDJMF3513-2021-28 Date Created03/01/2021
JMF Submittal IDJMF3511-23-2021-40 JMF StatusSubmittal Accepted for Verification
Producer Mix IDMD 6730 Authorized DateN/A

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-07-23-49-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content) Terrance White, CT D03 - Olivehurst Northern Regional Laboratory08/17/2020Kavon Rastegar
Yes
03/03/2021JMF20-032.
2020-07-23-49-2AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory08/18/2020Kavon Rastegar
Yes
03/03/2021JMF20-032. Test date estimated.
2020-07-23-49-3AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Terrance White, CT D03 - Olivehurst Northern Regional Laboratory08/17/2020Kavon Rastegar
Yes
03/03/2021JMF20-032.
2020-07-23-49-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory08/18/2020Kavon Rastegar
Yes
03/03/2021JMF20-032. Test date estimated. Jeff Herbert
2020-07-23-49-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory08/19/2020Kavon Rastegar
Yes
03/03/2021JMF20-032. Test date estimated.
2020-07-23-49-6AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory08/19/2020Kavon Rastegar
Yes
03/03/2021JMF20-032.

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-07-23-49-1 AASHTO T308-10 (Verified)
DIME Test ID: 2020-07-23-49-2 AASHTO T275-07r12 (Verified)
DIME Test ID: 2020-07-23-49-3 AASHTO T209-12 (Verified)
DIME Test ID: 2020-07-23-49-4 AASHTO T269-14 (Verified)
DIME Test ID: 2020-07-23-49-5 AASHTO T283-14 (Verified)
DIME Test ID: 2020-07-23-49-6 AASHTO T324-14 (Verified)