Sample Record

Owner Lab

  • CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2021-02-19-30

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 208973
DEA: 120H1004
EFIS: 1200000180
COOP: 120670
DIST-CO-RTE-PM12-ORA-405,73,405,605-9.3/24.3
Award Date11/07/2016
Closeout DateNot set
Work Description(Alternative Delivery) San Diego Freeway (I-405) Improvement Project SR-73 to I-605, Design Build Project, Administered by Orange County Transportation Authority, Caltrans METS to perform Source Inspection per RFP.
Location DescriptionOrange and Los Angeles Counties: 12-ORA-405 PM 9.3/24.2 / 07-LA-405 PM 0.0/1.2 12-ORA-22 PM R0.7/R3.8 / 12-ORA-22 PM R0.5/R0.7 12-ORA-73 PM R27.2/R27.8 / 12-ORA-605 PM 3.5/R1.6 07-LA-605 PM R0.0/R1.2
QA Service Level1 (Verified on 09/10/2015)

Sample Information

Sample Taken Date02/19/2021 Sample Unique Key30
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing02/23/2021
Sample typeVerification A brief description of the sampleJMF 3/4" HMA-A-SP R15 NO LAS
The quantity of what the sample constitutes4 Bags of Aggregate, 4 Bags of RAP From where was the sample collectedManufacturer
First name of sampler or witnessed byAll American Corona Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0152A-21 Linked DIME Sample ID
The fabricator/manufacturer/facility nameAll American Asphalt Corona Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-33-0005
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R15 The fabricator/manufacturer designation for the sample
The plant number105793 A detailed description of where the material sample was collectedBelt Cut at All American Corona Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-02-19-30-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Dominic Montemayor, Larry Diaz, CT D08 - Fontana Southern Regional Laboratory02/25/2021Michael Magana
Yes
03/03/2021Combined Virgin Aggregate Gradation
2021-02-19-30-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Michael Magana, CT D08 - Fontana Southern Regional Laboratory03/02/2021Michael Magana
Yes
03/03/2021
2021-02-19-30-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Larry Diaz, CT D08 - Fontana Southern Regional Laboratory02/26/2021Michael Magana
Yes
03/03/2021
2021-02-19-30-4AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory02/27/2021Michael Magana
Yes
03/03/2021
2021-02-19-30-5AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Sebastian Ferrer, CT D08 - Fontana Southern Regional Laboratory03/01/2021Michael Magana
Yes
03/03/2021
2021-02-19-30-6AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Sebastain Ferrer, CT D08 - Fontana Southern Regional Laboratory03/02/2021Michael Magana
Yes
03/03/2021
2021-02-19-30-7ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Michael Magana, CT D08 - Fontana Southern Regional Laboratory03/02/2021Michael Magana
Yes
03/03/2021
2021-02-19-30-8AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Michael Magana, CT D08 - Fontana Southern Regional Laboratory03/02/2021Michael Magana
Yes
03/03/2021
2021-02-19-30-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesSatish Jain, CT D08 - Fontana Southern Regional Laboratory02/25/2021Michael Magana
Yes
03/03/2021RAP Gradation After Ignition Oven
2021-02-19-30-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesDominic Montemayor, Larry Diaz, Satish Jain, CT D08 - Fontana Southern Regional Laboratory03/02/2021Michael Magana
Yes
03/03/2021Combined RAP/Virgin Aggregate Gradation w/Correlation Factors Applied

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-02-19-30-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-02-19-30-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-02-19-30-3 AASHTO T85-13 (Verified)
DIME Test ID: 2021-02-19-30-4 AASHTO T84-14 (Verified)
DIME Test ID: 2021-02-19-30-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-02-19-30-6 AASHTO T176-08 (Verified)
DIME Test ID: 2021-02-19-30-7 ASTM D4791-10 (Verified)
DIME Test ID: 2021-02-19-30-8 AASHTO T304-11 (Verified)
DIME Test ID: 2021-02-19-30-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2021-02-19-30-10 CTM 202-November 2011 (Verified)