DIME - Sample Record for DIME Sample ID 2020-06-19-23

DIME » All Projects » Project - DEA: 034H1004 » Sample 2020-06-19-23 » Sample Details

Sample Record

Owner Lab

CT D03 - Olivehurst Northern Regional Laboratory

DIME Sample ID 2020-06-19-23

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214841 DEA: 034H1004 EFIS: 0318000176
DIST-CO-RTE-PM	03-SIE-49-9.2/24.7
Award Date	05/29/2020
Closeout Date	07/29/2022
Work Description	INSTALL RETAINING STRUCTURE AND RSP CONCRETE EMBANKMENT.
Location Description	SIERRA COUNTY ON ROUTE 49 AT VARIOUS LOCATIONS
QA Service Level	1 (Verified on 03/24/2020)

Sample Information

Sample Taken Date	06/19/2020	Sample Unique Key	23
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/22/2020
Sample type	Verification	A brief description of the sample	3/4" HMA - A
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Chris	Last name of sampler or witnessed by	Hawkins (WITNESS)
Title of sampler	Vulcan personnel	Telephone number of sampler
Laboratory sample identification	JMF20-026	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Vulcan Materials GVA	Transportation Laboratory (TL) Number	c777828
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-29-0006
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Hot Bins
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

JMF Information

Verification ID	JMF3513-2021-23	Date Created	02/05/2021
JMF Submittal ID	JMF3511-23-2021-32	JMF Status	Submittal Accepted for Verification
Producer Mix ID	220989	Authorized Date	N/A

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2020-06-19-23-1	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Thomas Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	07/02/2020	Kavon Rastegar	Yes	02/08/2021	JMF20-026. Test date estimated.
2020-06-19-23-2	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Thom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	07/02/2020	Kavon Rastegar	Yes	02/08/2021	JMF20-026. Test date estimated.
2020-06-19-23-3	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Thomas Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	06/24/2020	Kavon Rastegar	Yes	02/08/2021	JMF20-026. Test date estimated.
2020-06-19-23-4	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Thomas Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	07/01/2020	Kavon Rastegar	Yes	02/08/2021	JMF20-026. Test date estimated.
2020-06-19-23-5	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Thomas Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	06/30/2020	Kavon Rastegar	Yes	02/08/2021	JMF20-026. Test date estimated.
2020-06-19-23-6	CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)	Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory	06/29/2020	Kavon Rastegar	Yes	02/08/2021	JMF20-026. Test date only for DIME entry.
2020-06-19-23-7	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Thomas Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	06/26/2020	Kavon Rastegar	Yes	02/08/2021	JMF20-026. Test date estimated.
2020-06-19-23-8	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Thomas Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	06/25/2020	Kavon Rastegar	Yes	02/08/2021	JMF20-026. Test date estimated.
2020-06-19-23-9	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Thomas Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	06/23/2020	Kavon Rastegar	Yes	02/08/2021	JMF20-026. Test date estimated. Thomas

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-06-19-23-1 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-06-19-23-2 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-06-19-23-3 AASHTO T176-08 (Verified)
DIME Test ID: 2020-06-19-23-4 AASHTO T304-11 (Verified)
DIME Test ID: 2020-06-19-23-5 ASTM D4791-10 (Verified)
DIME Test ID: 2020-06-19-23-6 CTM 204-June 2010 (Verified)
DIME Test ID: 2020-06-19-23-7 AASHTO T85-13 (Verified)
DIME Test ID: 2020-06-19-23-8 AASHTO T84-14 (Verified)
DIME Test ID: 2020-06-19-23-9 AASHTO T27-14 (Verified)