Owner Lab
- CT QASI - Sacramento Field Laboratory
DIME Sample ID 2021-01-28-16
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 214579 DEA: 010B0904 EFIS: 0100020444 |
DIST-CO-RTE-PM | 01-DN-101-8.2/8.7 |
Award Date | 04/21/2020 |
Closeout Date | Not set |
Work Description | BRIDGE REPLACEMENT |
Location Description | DEL NORTE COUNTY NEAR KLAMATH AT PANTHER CREEK BRIDGE AND AT HUNTER CREEK BRIDGE |
QA Service Level | 1 (Verified on 03/02/2020) |
Sample Information
Sample Taken Date | 01/28/2021 |
Sample Unique Key | 16 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 02/08/2021 |
Sample type | Quality Assurance |
A brief description of the sample | 1-1/4” x 3-1/2” bolt with washer and nut |
The quantity of what the sample constitutes | 1180 assemblies |
From where was the sample collected | Fabricator |
First name of sampler or witnessed by | Rex |
Last name of sampler or witnessed by | Harrison |
Title of sampler | CALTRANS METS QA INSPECTOR |
Telephone number of sampler | 904-238-8258 |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Acrow Bridge |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | Temporary Modular Bridge |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | AB584 |
Heat Number(s) | |
Nut Mfg. Lot Number(s) | |
Washer Mfg. Lot Number(s) | |
Bolt Specification | ASTM F3125 Grade A325 |
Bolt Length(s) | 3-1/2" |
Nut Specification | ASTM A563 Grade DH |
Washer Specification | ASTM F436 |
Finish | HDG ASTM A153 |
Diameter/Size | 1-1/4" |
Bolt Mfg. Lot Number | |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2021-01-28-16-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | bewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/11/2021 | bewing | Yes | 02/16/2021 | Nut Proof | |
2021-01-28-16-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | bewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/11/2021 | bewing | Yes | 02/16/2021 | Nut Proof | |
2021-01-28-16-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/11/2021 | Brian Ewing | Yes | 02/16/2021 | | |
2021-01-28-16-4 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/11/2021 | Brian Ewing | Yes | 02/16/2021 | | |
2021-01-28-16-5 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/11/2021 | Brian Ewing | Yes | 02/16/2021 | | |
2021-01-28-16-6 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/11/2021 | Brian Ewing | Yes | 02/16/2021 | | |
2021-01-28-16-7 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/11/2021 | Brian Ewing | Yes | 02/16/2021 | | |
2021-01-28-16-8 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/11/2021 | Brian Ewing | Yes | 02/16/2021 | | |
2021-01-28-16-9 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/11/2021 | Brian Ewing | Yes | 02/16/2021 | | |
2021-01-28-16-10 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/11/2021 | Brian Ewing | Yes | 02/16/2021 | | |
104508104509104559104560104561104562104563104564104565104566