DIME - Sample Record for DIME Sample ID 2021-01-28-12

DIME » All Projects » Project - DEA: 010B0904 » Sample 2021-01-28-12 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Sacramento Field Office

DIME Sample ID 2021-01-28-12

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214579 DEA: 010B0904 EFIS: 0100020444
DIST-CO-RTE-PM	01-DN-101-8.2/8.7
Award Date	04/21/2020
Closeout Date	Not set
Work Description	Panther Creek & Hunter Creek Bridges
Location Description	DEL NORTE COUNTY NEAR KLAMATH AT PANTHER CREEK BRIDGE AND AT HUNTER CREEK BRIDGE
QA Service Level	1 (Verified on 03/02/2020)

Sample Information

Sample Taken Date	01/28/2021	Sample Unique Key	12
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	02/08/2021
Sample type	Quality Assurance	A brief description of the sample	1” x 4-1/4” bolt with washer and nut
The quantity of what the sample constitutes	95 assemblies	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Rex	Last name of sampler or witnessed by	Harrison
Title of sampler	CALTRANS METS QA INSPECTOR	Telephone number of sampler	904-238-8258
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Acrow Bridge	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name	Temporary Modular Bridge

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	AB547A
Heat Number(s)		Nut Mfg. Lot Number(s)
Washer Mfg. Lot Number(s)		Bolt Specification	ASTM F3125 Grade A325
Bolt Length(s)	4-1/4”	Nut Specification	ASTM A563 Grade DH
Washer Specification	ASTM F436	Finish	HDG ASTM A153
Diameter/Size	1"	Bolt Mfg. Lot Number
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2021-01-28-12-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	bewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/10/2021	bewing	Yes	02/16/2021	Nut Proof
2021-01-28-12-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	bewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/11/2021	bewing	Yes	02/16/2021	A325 Bolt
2021-01-28-12-3	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/11/2021	Brian Ewing	Yes	02/16/2021
2021-01-28-12-4	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/11/2021	Brian Ewing	Yes	02/16/2021
2021-01-28-12-5	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/11/2021	Brian Ewing	Yes	02/16/2021
2021-01-28-12-6	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/11/2021	Brian Ewing	Yes	02/16/2021
2021-01-28-12-7	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/11/2021	Brian Ewing	Yes	02/16/2021
2021-01-28-12-8	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/11/2021	Brian Ewing	Yes	02/16/2021
2021-01-28-12-9	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/11/2021	Brian Ewing	Yes	02/16/2021
2021-01-28-12-10	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/11/2021	Brian Ewing	Yes	02/16/2021

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-01-28-12-1 ASTM F606-14a (Verified)
DIME Test ID: 2021-01-28-12-2 ASTM F606-14a (Verified)
DIME Test ID: 2021-01-28-12-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-01-28-12-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-01-28-12-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-01-28-12-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-01-28-12-7 ASTM B499-14 (Verified)
DIME Test ID: 2021-01-28-12-8 ASTM B499-14 (Verified)
DIME Test ID: 2021-01-28-12-9 ASTM B499-14 (Verified)
DIME Test ID: 2021-01-28-12-10 ASTM B499-14 (Verified)
DIME Test ID: 2021-01-28-12-11 ASTM B499-14 (Verified)
DIME Test ID: 2021-01-28-12-12 ASTM B499-14 (Verified)
DIME Test ID: 2021-01-28-12-13 ASTM E18-15 (Verified)
DIME Test ID: 2021-01-28-12-14 ASTM E18-15 (Verified)