Sample Record

Owner Lab

  • CT D03 - Olivehurst Northern Regional Laboratory

DIME Sample ID 2020-03-02-25

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 213411
DEA: 030H10U4
EFIS: 0317000246
DIST-CO-RTE-PM03-SAC-5-9.7/24.9
Award Date05/01/2019
Closeout Date02/22/2024
Work DescriptionNot set
Location DescriptionConstruction on state highway in Sacramento County in and near Sacramento from 1.1 miles south of Elk Grove Boulevard to American River Viaduct
QA Service Level1 (Verified on 07/19/2019)

Sample Information

Sample Taken Date03/02/2020 Sample Unique Key25
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/03/2021
Sample typeVerification A brief description of the sample3/4" HMA - A w/RAP (Long Life, RB)
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byWalt Last name of sampler or witnessed byWylie (WITNESS)
Title of samplerGranite Personnel Telephone number of sampler
Laboratory sample identificationJMF20-002 Linked DIME Sample ID
The fabricator/manufacturer/facility nameGranite Construction Company - Bradshaw Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-34-0060::VINEYARD SOUTH
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedCold Feed
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

JMF Information

Verification IDJMF3513-2021-1 Date Created01/04/2021
JMF Submittal IDJMF3511-23-2021-1 JMF StatusSubmittal Accepted for Verification
Producer Mix ID13149 Authorized DateN/A

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-03-02-25-1AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory03/18/2020Kavon Rastegar
Yes
01/05/2021JMF20-002. Test date estimated.
2020-03-02-25-2AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Thom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory03/19/2020Kavon Rastegar
Yes
01/05/2021JMF20-002. Test date estimated.
2020-03-02-25-3AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Thom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory03/09/2020Kavon Rastegar
Yes
01/05/2021JMF20-002. Test date estimated.
2020-03-02-25-4AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Thom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory03/17/2020Kavon Rastegar
Yes
01/05/2021JMF20-002. Test date estimated.
2020-03-02-25-5ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Thom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory03/16/2020Kavon Rastegar
Yes
01/05/2021JMF20-002. Test date estimated.
2020-03-02-25-6CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Thom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory03/12/2020Kavon Rastegar
Yes
01/05/2021JMF20-002. Test date estimated.
2020-03-02-25-7AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Thom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory03/11/2020Kavon Rastegar
Yes
01/05/2021JMF20-002. Test date estimated.
2020-03-02-25-8AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Thom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory03/10/2020Kavon Rastegar
Yes
01/05/2021JMF20-002. Test date estimated.
2020-03-02-25-9THIS TEST HAS BEEN SUPERSEDED.
AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Thom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory03/05/2020Kavon Rastegar
Yes
01/05/2021THIS TEST HAS BEEN SUPERSEDED.
JMF20-002. Test date estimated.
2020-03-02-25-10AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Thom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory03/05/2020Kavon Rastegar
Yes
01/06/2021JMF20-002. Test date estimated.

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-03-02-25-1 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-03-02-25-2 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-03-02-25-3 AASHTO T176-08 (Verified)
DIME Test ID: 2020-03-02-25-4 AASHTO T304-11 (Verified)
DIME Test ID: 2020-03-02-25-5 ASTM D4791-10 (Verified)
DIME Test ID: 2020-03-02-25-6 CTM 204-June 2010 (Verified)
DIME Test ID: 2020-03-02-25-7 AASHTO T85-13 (Verified)
DIME Test ID: 2020-03-02-25-8 AASHTO T84-14 (Verified)
DIME Test ID: 2020-03-02-25-9 AASHTO T27-14 (Verified)
DIME Test ID: 2020-03-02-25-10 AASHTO T27-14 (Verified)