Sample Record

Owner Lab

  • CT D03 - North Region Materials Lab

DIME Sample ID 2020-04-27-17

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214492
DEA: 033F5404
EFIS: 0313000136
DIST-CO-RTE-PM03-SAC-99,160-4.5/5.7,R44.5
Award Date01/24/2020
Closeout DateNot set
Work DescriptionFURNISH PRECAST PRESTRESSED CONCRETE SLAB & PLACE STRUCTURAL CONCRETE.
Location DescriptionSACRAMENTO COUNTY NEAR GALT ON ROUTE 99 FROM NORTH OF MINGO ROAD TO SOUTH OF ARNO ROAD OVERCROSSING AND IN SACRAMENTO ON ROUTE 160 AT AMERICAN RIVER BRIDGE
QA Service Level1 (Verified on 10/23/2019)

Sample Information

Sample Taken Date04/27/2020 Sample Unique Key17
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/28/2020
Sample typeVerification A brief description of the sample3/4 inch HMA - A (SP)
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byWalt Last name of sampler or witnessed byWylie (Witness)
Title of sampler Telephone number of sampler
Laboratory sample identificationJMF20-009B Linked DIME Sample ID
The fabricator/manufacturer/facility nameTeichert Perkins Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-34-0045::ASPEN IV SOUTH
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedHot Bins
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number JMF Verification ID JMF3513-2020-226

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-04-27-17-1AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Jeff HerbertCT D03 - North Region Materials Lab05/01/2020Kavon Rastegar
Yes
12/07/2020JMF20-009B. Test date estimated.
2020-04-27-17-2AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Kavon RastegarCT D03 - North Region Materials Lab05/01/2020Kavon Rastegar
Yes
12/07/2020JMF20-009B. Test date estimated.
2020-04-27-17-3THIS TEST HAS BEEN SUPERSEDED.
AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Thom StinnettCT D03 - North Region Materials Lab04/29/2020Kavon Rastegar
Yes
12/07/2020THIS TEST HAS BEEN SUPERSEDED.
JMF20-009. Test date estimated.
2020-04-27-17-4AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Jeff HerbertCT D03 - North Region Materials Lab04/28/2020Kavon Rastegar
Yes
12/07/2020JMF20-009B. Test date estimated
2020-04-27-17-5CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Jeff HerbertCT D03 - North Region Materials Lab04/28/2020Kavon Rastegar
Yes
12/07/2020JMF20-009B. Test date estimated.
2020-04-27-17-6AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Jeff HerbertCT D03 - North Region Materials Lab04/29/2020Kavon Rastegar
Yes
12/07/2020JMF20-009B. Test date estimated.
2020-04-27-17-7AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Jeff HerbertCT D03 - North Region Materials Lab04/29/2020Kavon Rastegar
Yes
12/07/2020JMF20-009B. Test date estimated.
2020-04-27-17-8AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Thom StinnettCT D03 - North Region Materials Lab05/01/2020Kavon Rastegar
Yes
12/07/2020JMF20-009B. Test date estimated.
2020-04-27-17-9AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Thom StinnettCT D03 - North Region Materials Lab04/29/2020Kavon Rastegar
Yes
12/07/2020JMF20-009B. Test date estimated.