Sample Record

Owner Lab

  • CT D03 - North Region Materials Lab

DIME Sample ID 2020-05-13-38

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 213485
DEA: 032F9804
EFIS: 0312000026
DIST-CO-RTE-PM03-COL-20-31.7/32.9
Award Date10/15/2018
Closeout Date05/11/2022
Work DescriptionPAVEMENT REHABILITATION
Location DescriptionCOLUSA COUNTY IN AND NEAR COLUSA FROM 0.1 MILE EAST OF THE MARKET STREET/STATE ROUTE 20 INTERSECTION TO 0.1 MILE SOUTH OF BUTTE VISTA DRIVE
QA Service Level1 (Verified on 01/08/2019)

Sample Information

Sample Taken Date05/13/2020 Sample Unique Key38
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/14/2020
Sample typeVerification A brief description of the sample1/2 inch HMA - A w/RAP
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byBrad Last name of sampler or witnessed by McKeenan
Title of samplerTeichert Personnel Telephone number of sampler
Laboratory sample identificationJMF20-020B Linked DIME Sample ID
The fabricator/manufacturer/facility nameTeichert Hallwood Transportation Laboratory (TL) NumberC778171
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot number
Sublot number JMF Verification ID JMF3513-2020-220

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-05-13-38-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)Terrance WhiteCT D03 - North Region Materials Lab06/17/2020Kavon Rastegar
Yes
11/23/2020JMF20-020B
2020-05-13-38-2AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Jeff HerbertCT D03 - North Region Materials Lab06/17/2020Kavon Rastegar
Yes
11/23/2020JMF20-020B
2020-05-13-38-3AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Kavon RastegarCT D03 - North Region Materials Lab06/18/2020Kavon Rastegar
Yes
11/23/2020JMF20-020B
2020-05-13-38-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Jeff HerbertCT D03 - North Region Materials Lab06/17/2020Kavon Rastegar
Yes
11/23/2020JMF20-020B
2020-05-13-38-5THIS TEST HAS BEEN SUPERSEDED.
AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Jeff HerbertCT D03 - North Region Materials Lab06/18/2020Kavon Rastegar
Yes
11/23/2020THIS TEST HAS BEEN SUPERSEDED.
Lab MREA, Jeff Herbert, provided the Average Wet Tensile Strength * of 176 value. NOTE: this value is arbitrary, our lab does not perform this aspect of this test method.
2020-05-13-38-7AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)Jeff HerbertCT D03 - North Region Materials Lab06/23/2020Kavon Rastegar
Yes
11/23/2020JMF20-020B
2020-05-13-38-8AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Jeff HerbertCT D03 - North Region Materials Lab06/18/2020Kavon Rastegar
Yes
11/23/2020JMF20-020B