Owner Lab
- CT HQ - Sacramento Asphalt Binder Laboratory
DIME Sample ID 2020-05-14-57
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 214422
DEA: 040J6424
EFIS: 0414000476 |
|---|
| DIST-CO-RTE-PM | 04-SON-101-32.8/R54.2 |
|---|
| Award Date | 12/24/2019 |
|---|
| Closeout Date | Not set |
|---|
| Work Description | CRACK, SEAT AND OVERLAY WITH RHMA AND HMA, AND REPLACE CULVERTS. |
|---|
| Location Description | SONOMA COUNTY AT VARIOUS LOCATIONS FROM LIMERICK LANE OVERCROSSING TO ROUTE 101/128 SEPARATION |
|---|
| QA Service Level | 1 (Verified on 09/23/2019) |
|---|
Sample Information
| Sample Taken Date | 05/14/2020 |
Sample Unique Key | 57 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 11/09/2020 |
|---|
| Sample type | Acceptance |
A brief description of the sample | Asphalt Binder |
|---|
| The quantity of what the sample constitutes | 1 Can, #1 Test |
From where was the sample collected | Source |
|---|
| First name of sampler or witnessed by | anthony |
Last name of sampler or witnessed by | Valdez |
|---|
| Title of sampler | |
Telephone number of sampler | |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Valero - Benicia |
Transportation Laboratory (TL) Number | 861879 |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | Asphalt Binder |
Performance Grade | PG 64-16 |
|---|
| Modified | No |
Lot number | |
|---|
| Sublot number | |
Tank number | Not set |
|---|
| Time of sample | Not set |
HMA Supplier | Not set |
|---|
| Asphalt Binder Supplier | Not set |
Multigrade | Not set |
|---|
| Multigrade Type | Not set |
HMA Design ID | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2020-05-14-57-1 | AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test) | Ruben Macias | CT HQ - Sacramento Asphalt Binder Laboratory | 11/10/2020 | Ruben Macias | Yes | 11/23/2020 | Per 2018 Standard Specifications |
|
| 2020-05-14-57-2 | AASHTO T51-13: Standard Method of Test for Ductility of Asphalt Materials (Asphalt Binder) | Harish Thakur | CT HQ - Sacramento Asphalt Binder Laboratory | 11/10/2020 | Harish Thakur | Yes | 11/23/2020 | as per 2018 standard specs |
|
| 2020-05-14-57-3 | AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Doug Ruff | CT HQ - Sacramento Asphalt Binder Laboratory | 11/10/2020 | Juan Gomez | Yes | 11/10/2020 | Per 2018 Standards and Specifications |
|
| 2020-05-14-57-4 | AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Doug Ruff | CT HQ - Sacramento Asphalt Binder Laboratory | 11/10/2020 | Juan Gomez | Yes | 11/10/2020 | Per 2018 Standards and Specifications |
|
| 2020-05-14-57-5 | AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Juan Gomez | CT HQ - Sacramento Asphalt Binder Laboratory | 11/13/2020 | Juan Gomez | Yes | 11/13/2020 | Per 2018 Standards and Specifications |
|
| 2020-05-14-57-6 | AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) | Sunday Agude | CT HQ - Sacramento Asphalt Binder Laboratory | 11/23/2020 | Juan Gomez | Yes | 11/23/2020 | Per 2018 Standard Specifications |
|
971989721397180972059773098518
