DIME - Sample Record for DIME Sample ID 2020-06-18-47

DIME » All Projects » Project - DEA: 031G2504 » Sample 2020-06-18-47 » Sample Details

Sample Record

Owner Lab

CT D03 - Olivehurst Northern Regional Laboratory

DIME Sample ID 2020-06-18-47

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214797 DEA: 031G2504 EFIS: 0318000107
DIST-CO-RTE-PM	03-ED-193-19.3/R24.7
Award Date	05/19/2020
Closeout Date	03/16/2021
Work Description	COLD PLANE AC PAVEMENT, RHMA-G OVERLAY, & REPLACE GUARDRAIL.
Location Description	EL DORADO COUNTY NEAR PLACERVILLE FROM 0.1 MILE NORTH OF GARDEN VALLEY ROAD TO SOUTH FORK AMERICAN RIVER BRIDGE
QA Service Level	1 (Verified on 03/24/2020)

Sample Information

Sample Taken Date	06/18/2020	Sample Unique Key	47
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/19/2020
Sample type	Verification	A brief description of the sample	1/2 inch RHMA-G
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	GRI Personnel	Last name of sampler or witnessed by	GRI Personnel
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	George Reed - Clements Plant	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA or name of Pit)	91-03-0020::JACKSON VALLEY QUARRY
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Batch Plant Hot Bins
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

JMF Information

HMA Design ID	JMF3512-2020-300-2020-GR-003R-VSS	Date Created	11/03/2020
Submittal	JMF3511-23-2020-302 Submittal Accepted for Verification\| JMF3513-2021-45 JMF3511-23-2020-303 Submittal Accepted for Verification\| JMF3513-2021-46

Submitted Tests

DIME Test ID	Test Method	Tester Name	Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2020-06-18-47-1	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Jeff Herbert	CT D03 - Olivehurst Northern Regional Laboratory	07/21/2020	Kavon Rastegar	Yes	11/05/2020	JMF20-012B
2020-06-18-47-2	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Jeff Herbert	CT D03 - Olivehurst Northern Regional Laboratory	07/21/2020	Kavon Rastegar	Yes	11/05/2020	JMF20-012B
2020-06-18-47-3	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Jeff Herbert	CT D03 - Olivehurst Northern Regional Laboratory	07/21/2020	Kavon Rastegar	Yes	11/06/2020	JMF20-012B
2020-06-18-47-4	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Jeff Herbert	CT D03 - Olivehurst Northern Regional Laboratory	07/21/2020	Kavon Rastegar	Yes	11/06/2020	JMF20-012B
2020-06-18-47-5	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Jeff Herbert	CT D03 - Olivehurst Northern Regional Laboratory	07/21/2020	Kavon Rastegar	Yes	11/06/2020	JMF20-012B
2020-06-18-47-6	CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)	Jeff Herbert	CT D03 - Olivehurst Northern Regional Laboratory	07/21/2020	Kavon Rastegar	Yes	11/06/2020	JMF20-012B
2020-06-18-47-7	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Jeff Herbert	CT D03 - Olivehurst Northern Regional Laboratory	07/21/2020	Kavon Rastegar	Yes	11/06/2020	JMF20-012B
2020-06-18-47-8	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Jeff Herbert	CT D03 - Olivehurst Northern Regional Laboratory	07/21/2020	Kavon Rastegar	Yes	11/06/2020	JMF20-0102B
2020-06-18-47-9	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Jeff Herbert	CT D03 - Olivehurst Northern Regional Laboratory	07/21/2020	Kavon Rastegar	Yes	11/06/2020	JMF20-012B

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-06-18-47-1 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-06-18-47-2 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-06-18-47-3 AASHTO T176-08 (Verified)
DIME Test ID: 2020-06-18-47-4 AASHTO T304-11 (Verified)
DIME Test ID: 2020-06-18-47-5 ASTM D4791-10 (Verified)
DIME Test ID: 2020-06-18-47-6 CTM 204-June 2010 (Verified)
DIME Test ID: 2020-06-18-47-7 AASHTO T85-13 (Verified)
DIME Test ID: 2020-06-18-47-8 AASHTO T84-14 (Verified)
DIME Test ID: 2020-06-18-47-9 AASHTO T27-14 (Verified)