Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2020-10-09-6
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 208945
DEA: 07288604
EFIS: 0700021080
COOP: 074663 |
|---|
| DIST-CO-RTE-PM | 07-LA-710-6.0-9.4 |
|---|
| Award Date | 09/02/2011 |
|---|
| Closeout Date | Not set |
|---|
| Work Description | Gerald Desmond Bridge Replacement - A Design Build project. IQA samples will be selected by Port/Caltrans representatives and sent to Translab for testing. |
|---|
| Location Description | Port of Long Beach (District 7) |
|---|
| QA Service Level | 1 (Verified on 06/03/2013) |
|---|
Sample Information
| Sample Taken Date | 10/09/2020 |
Sample Unique Key | 6 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 10/19/2020 |
|---|
| Sample type | Verification |
A brief description of the sample | ASTM F3125 Grade A490 1"-8 x 4 3/4 bolt |
|---|
| The quantity of what the sample constitutes | 15 |
From where was the sample collected | Job Site |
|---|
| First name of sampler or witnessed by | Andrew |
Last name of sampler or witnessed by | Webster |
|---|
| Title of sampler | |
Telephone number of sampler | |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | LeJeune Bolt Company |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B201-022-20 |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | L1414044 |
|---|
| Heat Number(s) | 10512420
62149825
181641
|
Nut Mfg. Lot Number(s) | 31089-6214982502Y |
|---|
| Washer Mfg. Lot Number(s) | D7017Z |
Bolt Specification | ASTM F3125 Grade A490 |
|---|
| Bolt Length(s) | 4 3/4" |
Nut Specification | ASTM A563 DH |
|---|
| Washer Specification | ASTM F436 |
Finish | Geomet, Mech Galv
|
|---|
| Diameter/Size | 1"-8 |
Bolt Mfg. Lot Number | 044856Z |
|---|
| Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2020-10-09-6-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | fsaylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/22/2020 | fsaylor | Yes | 10/27/2020 | A325 |
|
| 2020-10-09-6-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | fsaylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/22/2020 | fsaylor | Yes | 10/27/2020 | Proof Load |
|
| 2020-10-09-6-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/22/2020 | Brian Ewing | Yes | 10/27/2020 | |
|
| 2020-10-09-6-4 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/22/2020 | Brian Ewing | Yes | 10/27/2020 | |
|
| 2020-10-09-6-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/22/2020 | Brian Ewing | Yes | 10/27/2020 | |
|
| 2020-10-09-6-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/22/2020 | Brian Ewing | Yes | 10/27/2020 | |
|
| 2020-10-09-6-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/22/2020 | Brian Ewing | Yes | 10/27/2020 | |
|
| 2020-10-09-6-8 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/22/2020 | Brian Ewing | Yes | 10/27/2020 | |
|
9591195917959209592195922959239592495925
