Sample Record
Owner Lab
- CT D02 - Redding Northern Regional Laboratory
DIME Sample ID 2020-09-22-13
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 214684 DEA: 020J1404 EFIS: 0219000065 |
|---|---|
| DIST-CO-RTE-PM | 02-SIS-96,263-VAR |
| Award Date | 04/15/2020 |
| Closeout Date | 10/22/2020 |
| Work Description | PLACE HMA OVERLAY, GUARDRAIL, SHOULDER BACKING, REPLACE AC SURFACING. |
| Location Description | SISKIYOU COUNTY AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 03/02/2020) |
Sample Information
| Sample Taken Date | 09/22/2020 | Sample Unique Key | 13 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/23/2020 |
| Sample type | Acceptance | A brief description of the sample | Shoulder Backing |
| The quantity of what the sample constitutes | not identified | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Chad | Last name of sampler or witnessed by | Ensminger |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | D78633 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | JF Shea Construction | Transportation Laboratory (TL) Number | 850986 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | HWY 263 Peters Pit |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | In Place SIS-96-PM 94.3 | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | Not set |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2020-09-22-13-1 | CTM 301-March 2000: Method for Determining the Resistance "R" Value of Treated and Untreated Bases, Subbases, and Basement Soils by the Stabilometer | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 09/26/2020 | Michael Antonetti | No | Info | ||
| 2020-09-22-13-2 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Arthur Mills, CT D02 - Redding Northern Regional Laboratory | 09/24/2020 | Michael Antonetti | No | Info | ||
| 2020-09-22-13-3 | CTM 217-June 2011: Method of Test for Sand Equivalent | Arthur Mills, CT D02 - Redding Northern Regional Laboratory | 09/24/2020 | Michael Antonetti | No | Info | ||
| 2020-09-22-13-4 | CTM 229-June 2011: Method of Test for Durability Index | Arthur Mills, CT D02 - Redding Northern Regional Laboratory | 09/24/2020 | Michael Antonetti | No | Info | ||
| 2020-09-22-13-5 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 09/25/2020 | Michael Antonetti | No | Info | ||
| 2020-09-22-13-6 | CTM 205-December 2010: Method of Test for Determining Percentage of Crushed Particles | a, CT D02 - Redding Northern Regional Laboratory | 09/24/2020 | Michael Antonetti | No | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2020-09-22-13-1 CTM 301-March 2000
DIME Test ID: 2020-09-22-13-2 CTM 202-November 2011
DIME Test ID: 2020-09-22-13-3 CTM 217-June 2011
DIME Test ID: 2020-09-22-13-4 CTM 229-June 2011
DIME Test ID: 2020-09-22-13-5 CTM 204-June 2010
DIME Test ID: 2020-09-22-13-6 CTM 205-December 2010