DIME - Sample Record for DIME Sample ID 2020-06-16-49

DIME » All Projects » Project - DEA: 031J1904 » Sample 2020-06-16-49 » Sample Details

Sample Record

Owner Lab

CT D03 - Olivehurst Northern Regional Laboratory

DIME Sample ID 2020-06-16-49

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 215041 DEA: 031J1904 EFIS: 0320000169
DIST-CO-RTE-PM	03-YUB,YUB/SUT-70,70,99-Var
Award Date	06/08/2020
Closeout Date	06/27/2022
Work Description	In-kind restoration pvmt. repair w/HMA medium overlay, striping, traffic control, incidental work
Location Description	Yubat & Sutter Counties at various locaitons
QA Service Level	1 (Verified on 07/20/2020)

Sample Information

Sample Taken Date	06/16/2020	Sample Unique Key	49
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/16/2020
Sample type	Verification	A brief description of the sample	3/4 inch HMA-A
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	GRI Personnel	Last name of sampler or witnessed by	GRI Personnel
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	George Reed - Rio Linda	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-58-0001::WESTERN AGGREGATES
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Windrow at the Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

JMF Information

Verification ID	JMF3513-2020-200	Date Created	09/09/2020
JMF Submittal ID	JMF3511-23-2020-286	JMF Status	Submittal Accepted for Verification
Producer Mix ID	2020-RL-004D-VSS-64-16	Authorized Date	N/A

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2020-06-16-49-2	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory	07/30/2020	Kavon Rastegar	Yes	09/09/2020	JMF20-025
2020-06-16-49-3	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory	07/30/2020	Kavon Rastegar	Yes	09/09/2020	JMF20-025
2020-06-16-49-4	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory	07/30/2020	Kavon Rastegar	Yes	09/09/2020	JMF20-025
2020-06-16-49-5	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory	07/30/2020	Kavon Rastegar	Yes	09/09/2020	JMF20-025
2020-06-16-49-6	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory	07/30/2020	Kavon Rastegar	Yes	09/09/2020	JMF20-025
2020-06-16-49-7	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory	07/30/2020	Kavon Rastegar	Yes	09/09/2020	JMF20-025
2020-06-16-49-8	THIS TEST HAS BEEN SUPERSEDED. AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory	07/30/2020	Kavon Rastegar	Yes	09/10/2020	THIS TEST HAS BEEN SUPERSEDED.
2020-06-16-49-9	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory	07/30/2020	Kavon Rastegar	Yes	09/10/2020	JMF20-025

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-06-16-49-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-06-16-49-3 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-06-16-49-4 AASHTO T176-08 (Verified)
DIME Test ID: 2020-06-16-49-5 AASHTO T304-11 (Verified)
DIME Test ID: 2020-06-16-49-6 AASHTO T85-13 (Verified)
DIME Test ID: 2020-06-16-49-7 AASHTO T84-14 (Verified)
DIME Test ID: 2020-06-16-49-8 AASHTO T27-14 (Verified)
DIME Test ID: 2020-06-16-49-9 AASHTO T27-14 (Verified)