Owner Lab
- CT D02 - North Region Materials Lab
DIME Sample ID 2020-06-08-46
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 214589
DEA: 020J1604 |
|---|
| DIST-CO-RTE-PM | 02-PLU-284-0.0/8.3 |
|---|
| Award Date | 02/11/2020 |
|---|
| Closeout Date | 10/06/2020 |
|---|
| Work Description | PLACE HMA (TYPE A), PRECOATED AGGREGATE (SEAL COAT), HMA (LEVELING). |
|---|
| Location Description | PLUMAS COUNTY NEAR CHILCOOT FROM ROUTE 70 TO 1 MILE NORTH OF LITTLE LAST CHANCE CREEK BRIDGE NUMBER 09-0072 |
|---|
| QA Service Level | 1 (Verified on 01/22/2020) |
|---|
Sample Information
| Sample Taken Date | 06/08/2020 |
Sample Unique Key | 46 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 06/09/2020 |
|---|
| Sample type | Verification |
A brief description of the sample | 3/4-inch Type A HMA (eq. PG 64-16) 23.0 RAP, 1.0 Lime |
|---|
| The quantity of what the sample constitutes | JMF Verification and PSE |
From where was the sample collected | Manufacturer |
|---|
| First name of sampler or witnessed by | CGI |
Last name of sampler or witnessed by | CGI |
|---|
| Title of sampler | |
Telephone number of sampler | |
|---|
| Laboratory sample identification | D78459 |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Ward Lake Plant, Litchfield, CA |
Transportation Laboratory (TL) Number | 733200 |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | Hot Mix Asphalt |
HMA Type | Type A HMA |
|---|
| HMA Grading | 3/4 inch |
Lot number | |
|---|
| Sublot number | |
JMF Verification ID | JMF3513-2020-192 |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2020-06-08-46-1 | AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content) | Ward Jenkins | CT D02 - North Region Materials Lab | 06/26/2020 | Ward Jenkins | Yes | 08/27/2020 | |
|
| 2020-06-08-46-2 | AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity) | Darrell Valasek | CT D02 - North Region Materials Lab | 06/09/2020 | Ward Jenkins | Yes | 08/27/2020 | |
|
| 2020-06-08-46-4 | AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity) | Terry McCormick | CT D02 - North Region Materials Lab | 06/10/2020 | Ward Jenkins | Yes | 08/27/2020 | |
|
| 2020-06-08-46-5 | AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void) | Terry McCormick | CT D02 - North Region Materials Lab | 06/11/2020 | Ward Jenkins | Yes | 08/27/2020 | |
|
| 2020-06-08-46-6 | AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content) | D. Valasek and T. McCormick | CT D02 - North Region Materials Lab | 06/13/2020 | Ward Jenkins | Yes | 08/27/2020 | |
|
| 2020-06-08-46-7 | AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track) | Darrell Valasek | CT D02 - North Region Materials Lab | 06/15/2020 | Ward Jenkins | Yes | 08/27/2020 | |
|
| 2020-06-08-46-8 | AASHTO T312-14: Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor (Method of Compaction) | Darrell Valasek | CT D02 - North Region Materials Lab | 06/10/2020 | Ward Jenkins | Yes | 08/27/2020 | |
|
90633906349076490765908379083990635
