DIME » All Projects » Project - DEA: 020J1704 » Sample 2020-06-03-36 » Sample Details

Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2020-06-03-36

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214582
DEA: 020J1704
EFIS: 0219000068
DIST-CO-RTE-PM02-SIS-3-36.0/38.1,R45.0/R46.9
Award Date02/06/2020
Closeout Date08/27/2020
Work DescriptionASPHALT RUBBER CHIP SEAL WITH REPLACE AC SURFACING AND STRIPING.
Location DescriptionSISKIYOU COUNTY IN AND NEAR YREKA FROM 0.2 MILE NORTH OF REIDEL RANCH ROAD TO MOFFETT CREEK ROAD AND FROM 3.5 MILES NORTH OF UPPER SOAP CREEK ROAD TO 0.7 MILE NORTH OF RICHMAN ROAD
QA Service Level1 (Verified on 01/22/2020)

Sample Information

Sample Taken Date06/03/2020 Sample Unique Key36
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/03/2020
Sample typeAcceptance A brief description of the sample3/8" Chips and Sand
The quantity of what the sample constitutesnot provided From where was the sample collectedManufacturer
First name of sampler or witnessed byJohn Last name of sampler or witnessed byCarmichael
Title of sampler Telephone number of sampler
Laboratory sample identificationD78454 Linked DIME Sample ID
The fabricator/manufacturer/facility nameNorthstate Asphalt Transportation Laboratory (TL) Number990766
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-45-0061 LATONA AGGREGATES
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedstock pile
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/8 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-06-03-36-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Arthur Mills, CT D02 - Redding Northern Regional Laboratory06/03/2020Michael Antonetti
Yes
10/12/2020
2020-06-03-36-2AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)Arthur Mills, CT D02 - Redding Northern Regional Laboratory06/03/2020Michael Antonetti
Yes
10/12/2020
2020-06-03-36-3AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Terry McCormick, CT D02 - Redding Northern Regional Laboratory06/03/2020Michael Antonetti
Yes
10/12/2020
2020-06-03-36-5ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Michael Antonetti, CT D02 - Redding Northern Regional Laboratory06/03/2020Michael Antonetti
Yes
10/12/2020
2020-06-03-36-6AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Arthur Mills, CT D02 - Redding Northern Regional Laboratory06/03/2020Michael Antonetti
Yes
10/12/2020

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-06-03-36-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-06-03-36-2 AASHTO T210-15 (Verified)
DIME Test ID: 2020-06-03-36-3 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-06-03-36-5 ASTM D4791-10 (Verified)
DIME Test ID: 2020-06-03-36-6 AASHTO T335-09r13 (Verified)