DIME - Sample Record for DIME Sample ID 2020-03-26-25

DIME » All Projects » Project - DEA: 030H5304 » Sample 2020-03-26-25 » Sample Details

Sample Record

Owner Lab

CT D03 - Olivehurst Northern Regional Laboratory

DIME Sample ID 2020-03-26-25

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214251 DEA: 030H5304 EFIS: 0315000203
DIST-CO-RTE-PM	03-SAC-80-15.0/17.2
Award Date	09/27/2019
Closeout Date	12/07/2021
Work Description	REPLACE WEIGH-IN-MOTION SYSTEM AND ADD A LANE INTO TRUCK SCALES.
Location Description	SACRAMENTO COUNTY IN SACRAMENTO AND CITRUS HEIGHTS FROM 0.7 MILE EAST OF GREENBACK LANE OVERCROSSING TO 0.3 MILE EAST OF ANTELOPE ROAD OVERCROSSING
QA Service Level	1 (Verified on 07/22/2019)

Sample Information

Sample Taken Date	03/26/2020	Sample Unique Key	25
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	03/26/2020
Sample type	Verification	A brief description of the sample	3/4 inch HMA w 15% RAP
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Source
First name of sampler or witnessed by	Walt	Last name of sampler or witnessed by	Wiley
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Teichert Perkins	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Reclaimed Asphalt Pavement	RAP Source	Teichert Perkins
Aggregate Size		Aggregate Source
RAP Stockpile		Stockpile Size (tons)
Reclaimed Asphalt Pavement Mix Number	Not set

JMF Information

Verification ID	JMF3513-2020-183	Date Created	08/13/2020
JMF Submittal ID	JMF3511-23-2020-265	JMF Status	Submittal Accepted for Verification
Producer Mix ID	PN201902-SP	Authorized Date	N/A

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2020-03-26-25-1	AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	Kavon Rastegar, CT D03 - Olivehurst Northern Regional Laboratory	04/13/2020	Kavon Rastegar	Yes	08/24/2020
2020-03-26-25-2	THIS TEST HAS BEEN SUPERSEDED. AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Kavon Rastegar, CT D03 - Olivehurst Northern Regional Laboratory	03/26/2020	Kavon Rastegar	Yes	08/24/2020	THIS TEST HAS BEEN SUPERSEDED. JMF 20-009
2020-03-26-25-3	THIS TEST HAS BEEN SUPERSEDED. CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Kavon Rastegar, CT D03 - Olivehurst Northern Regional Laboratory	04/13/2020	Kavon Rastegar	Yes	08/24/2020	THIS TEST HAS BEEN SUPERSEDED. JMF 20-009
2020-03-26-25-4	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory	04/13/2020	Kavon Rastegar	Yes	09/04/2020	JMF 20-009
2020-03-26-25-5	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory	04/13/2020	Kavon Rastegar	Yes	09/04/2020	JMF 20-009

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-03-26-25-1 AASHTO T209-12 (Verified)
DIME Test ID: 2020-03-26-25-2 AASHTO T308-10 (Verified)
DIME Test ID: 2020-03-26-25-3 CTM 202-November 2011 (Verified)
DIME Test ID: 2020-03-26-25-4 AASHTO T308-10 (Verified)
DIME Test ID: 2020-03-26-25-5 CTM 202-November 2011 (Verified)