Sample Record
Owner Lab
- CT HQ - QASI Bay Area Field Office
DIME Sample ID 2020-08-21-1
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 08/21/2020 | Sample Unique Key | 1 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/21/2020 |
| Sample type | Quality Assurance | A brief description of the sample | 5/8" A563-DH Plain HEX NUT |
| The quantity of what the sample constitutes | 9/169 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Dong | Last name of sampler or witnessed by | Shin |
| Title of sampler | QA Inspector | Telephone number of sampler | 205-999-5798 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | UIS Lindon UT | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B 314-068-20 | Structure unique identifier | |
| Structure name |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | No |
|---|---|---|---|
| Heat Number(s) | 6215177505 | Nut Mfg. Lot Number(s) | 32878-6215177505 |
| Washer Mfg. Lot Number(s) | N/A | Bolt Specification | N/A |
| Bolt Length(s) | N/A | Nut Specification | A563-DH |
| Washer Specification | N/A | Finish | Plain |
| Diameter/Size | 5/8" | Bolt Mfg. Lot Number | N/A |
| Rocap Test Requirement(s) | No | Lubricant Requirements(s) | No |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2020-08-21-1-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | fsaylor, CT HQ - Sacramento Structural Materials Testing Laboratory | 08/27/2020 | fsaylor | Yes | 09/02/2020 | Nut Proof | |
| 2020-08-21-1-2 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory | 08/28/2020 | Fred Saylor | Yes | 09/02/2020 | ||
| 2020-08-21-1-3 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory | 08/28/2020 | Fred Saylor | Yes | 09/02/2020 | ||
| 2020-08-21-1-4 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory | 08/28/2020 | Fred Saylor | Yes | 09/02/2020 | ||
| 2020-08-21-1-5 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | bewing, CT HQ - Sacramento Structural Materials Testing Laboratory | 09/15/2020 | bewing | No | Nut Proof | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2020-08-21-1-1 ASTM F606-14a (Verified)
DIME Test ID: 2020-08-21-1-2 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-08-21-1-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-08-21-1-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-08-21-1-5 ASTM F606-14a