Sample Record

Owner Lab

  • CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2020-08-06-44

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 213603
DEA: 07301504
EFIS: 0714000020
DIST-CO-RTE-PM07-LA-1,10-R34.6/35.2,R2.1/18.4
Award Date11/19/2018
Closeout Date01/18/2022
Work DescriptionREPLACING CONCRETE AND AC PAVEMENT
Location DescriptionLOS ANGELES COUNTY IN SANTA MONICA AND LOS ANGELES ON ROUTE 1 FROM 0.1 MILE WEST OF MAIN STREET OVERCROSSING TO ROUTE 1/10 SEPARATION AND ON ROUTE 10 FROM ROUTE 1/10 SEPARATION TO ROUTE 5/10 SEPARATION AND AT ROUTE 10/110 SEPARATION
QA Service Level1 (Verified on 07/26/2019)

Sample Information

Sample Taken Date08/06/2020 Sample Unique Key44
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/20/2020
Sample typeVerification A brief description of the sampleJMF 1/2" HMA-A-SP r15 0.5% LAS
The quantity of what the sample constitutes3 Bags Of Coldfeed Agg., 2 Bags Of rap From where was the sample collectedManufacturer
First name of sampler or witnessed byVulcan Materials Irwindale Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0514A-20 Linked DIME Sample ID
The fabricator/manufacturer/facility nameVulcan Materials-Irwindale Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-19-0035::FISH CANYON QUARRY
The fabricator's/manufacturer's product name for the sample1/2 HMA-A-SP R15 The fabricator/manufacturer designation for the sample
The plant number320819A IRW LTR A detailed description of where the material sample was collectedBelt Cut at Vulcan Materials-Irwindale
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size1/2 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-08-06-44-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Satish Jain/Husni Ankir, CT D08 - Fontana Southern Regional Laboratory08/25/2020Satish Jain
Yes
08/31/2020Combined Virgin Aggregate Gradation
2020-08-06-44-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory08/28/2020Satish Jain
Yes
08/31/2020
2020-08-06-44-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Larry Diaz, CT D08 - Fontana Southern Regional Laboratory08/26/2020Satish Jain
Yes
08/31/2020
2020-08-06-44-4AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory08/26/2020Satish Jain
Yes
08/31/2020
2020-08-06-44-5AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Sebastian Ferrer, CT D08 - Fontana Southern Regional Laboratory08/28/2020Satish Jain
Yes
08/31/2020
2020-08-06-44-6AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Sebastian Ferrer, CT D08 - Fontana Southern Regional Laboratory08/27/2020Satish Jain
Yes
08/31/2020
2020-08-06-44-7ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory08/28/2020Satish Jain
Yes
08/31/2020
2020-08-06-44-8AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory08/28/2020Satish Jain
Yes
08/31/2020
2020-08-06-44-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesSatish Jain, CT D08 - Fontana Southern Regional Laboratory08/27/2020Satish Jain
Yes
08/31/2020Rap Gradation After Ignition
2020-08-06-44-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesSatish Jain/Husni Ankir, CT D08 - Fontana Southern Regional Laboratory08/28/2020Satish Jain
Yes
08/31/2020Combined Aggregate Gradation W/ Rap Gradation Correlation Factors

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-08-06-44-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-08-06-44-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-08-06-44-3 AASHTO T85-13 (Verified)
DIME Test ID: 2020-08-06-44-4 AASHTO T84-14 (Verified)
DIME Test ID: 2020-08-06-44-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-08-06-44-6 AASHTO T176-08 (Verified)
DIME Test ID: 2020-08-06-44-7 ASTM D4791-10 (Verified)
DIME Test ID: 2020-08-06-44-8 AASHTO T304-11 (Verified)
DIME Test ID: 2020-08-06-44-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2020-08-06-44-10 CTM 202-November 2011 (Verified)