DIME - Sample Record for DIME Sample ID 2020-08-08-6

DIME » All Projects » Project - DEA: 073096U4 » Sample 2020-08-08-6 » Sample Details

Sample Record

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2020-08-08-6

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214573 DEA: 073096U4 EFIS: 0719000091
DIST-CO-RTE-PM	07-LA-210-R0.0/R9.7
Award Date	Not set
Closeout Date	Not set
Work Description	PLACE CONCRETE PAVEMENT, BARRIER, HMA, DRAINAGE, AND ELECTRICAL.
Location Description	LOS ANGELES COUNTY IN LOS ANGELES FROM INTERSTATE 5 TO WHEATLAND AVENUE UNDERCROSSING
QA Service Level	1 (Verified on 06/05/2020)

Sample Information

Sample Taken Date	08/08/2020	Sample Unique Key	6
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/12/2020
Sample type	Verification	A brief description of the sample	JMF 1/2" A-SP R15 0.25% EVO
The quantity of what the sample constitutes	8 Bags Of Agg., 1 Bag Rap	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Jay	Last name of sampler or witnessed by	Olksen
Title of sampler		Telephone number of sampler
Laboratory sample identification	0494A-20	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Vulcan Materials-Sun Valley	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0035::FISH CANYON QUARRY
The fabricator's/manufacturer's product name for the sample	1/2 WMA-A-SP R15	The fabricator/manufacturer designation for the sample
The plant number	320914 SVA LTR	A detailed description of where the material sample was collected	Belt Cut at Vulcan Sun Valley Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2020-08-08-6-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Satish Jain, Sebastian Ferrer, CT D08 - Fontana Southern Regional Laboratory	08/20/2020	Satish Jain	Yes	08/28/2020	Combined Virgin Aggregate Gradation
2020-08-08-6-2	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Michael Magana, CT D08 - Fontana Southern Regional Laboratory	08/24/2020	Satish Jain	Yes	08/28/2020
2020-08-08-6-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	08/22/2020	Satish Jain	Yes	08/28/2020
2020-08-08-6-4	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory	08/22/2020	Satish Jain	Yes	08/28/2020
2020-08-08-6-5	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Michael Magana, CT D08 - Fontana Southern Regional Laboratory	08/24/2020	Satish Jain	Yes	08/28/2020
2020-08-08-6-6	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	08/22/2020	Satish Jain	Yes	08/28/2020
2020-08-08-6-7	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Michael Magana, CT D08 - Fontana Southern Regional Laboratory	08/24/2020	Satish Jain	Yes	08/28/2020
2020-08-08-6-8	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Michael Magana, CT D08 - Fontana Southern Regional Laboratory	08/24/2020	Satish Jain	Yes	08/28/2020
2020-08-08-6-9	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Michael Magana, CT D08 - Fontana Southern Regional Laboratory	08/24/2020	Satish Jain	Yes	08/28/2020	Rap Gradation After Ignition
2020-08-08-6-10	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Satish Jain, Sebastian Ferrer, Michael Magana, CT D08 - Fontana Southern Regional Laboratory	08/24/2020	Satish Jain	Yes	08/28/2020	Combined RAP/Virgin Aggregate Gradation w/Correlation Factors Applied

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-08-08-6-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-08-08-6-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-08-08-6-3 AASHTO T85-13 (Verified)
DIME Test ID: 2020-08-08-6-4 AASHTO T84-14 (Verified)
DIME Test ID: 2020-08-08-6-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-08-08-6-6 AASHTO T176-08 (Verified)
DIME Test ID: 2020-08-08-6-7 ASTM D4791-10 (Verified)
DIME Test ID: 2020-08-08-6-8 AASHTO T304-11 (Verified)
DIME Test ID: 2020-08-08-6-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2020-08-08-6-10 CTM 202-November 2011 (Verified)