DIME - Sample Record for DIME Sample ID 2020-06-02-30

DIME » All Projects » Project - DEA: 021H3904 » Sample 2020-06-02-30 » Sample Details

Sample Record

Owner Lab

CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2020-06-02-30

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214513 DEA: 021H3904 EFIS: 0216000041
DIST-CO-RTE-PM	02-SHA-5-R32.0/R32.3
Award Date	01/24/2020
Closeout Date	09/28/2021
Work Description	O'BRIEN DECK AND RAIL REHAB: WEATHER INFO SYSTEM, STRUCTURAL CONCRETE, HMA, REMOVE BRIDGE BARRIER.
Location Description	SHASTA COUNTY ABOUT 10 MILES SOUTH OF LAKEHEAD FROM 0.1 MILE SOUTH TO 0.3 MILE NORTH OF O'BRIEN UNDERCROSSING
QA Service Level	1 (Verified on 01/22/2020)

Sample Information

Sample Taken Date	06/02/2020	Sample Unique Key	30
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/02/2020
Sample type	Verification	A brief description of the sample	1/2-inch Type A Untreated Virgin Aggregate
The quantity of what the sample constitutes	JMF Verification Renewal	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Anthony	Last name of sampler or witnessed by	Ortiz
Title of sampler		Telephone number of sampler
Laboratory sample identification	D78453F	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Northstate Asphalt, Redding, CA	Transportation Laboratory (TL) Number	036436
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-45-0057
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Lab-Batched from Sized Untreated Aggregate Stockpiles
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	JMF 19-08-R1	Lot number
Sublot number		Aggregate Mix Number	Not set

JMF Information

Verification ID	JMF3513-2020-172	Date Created	07/31/2020
JMF Submittal ID	JMF3511-22-2020-251	JMF Status	Submittal Authorized For Use
Producer Mix ID	L190278	Authorized Date	08/17/2020

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date
2020-06-02-30-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Ward Jenkins, CT D02 - Redding Northern Regional Laboratory	07/31/2020	Ward Jenkins	Yes	08/14/2020
2020-06-02-30-2	CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)	Terry McCormick, CT D02 - Redding Northern Regional Laboratory	08/05/2020	Ward Jenkins	Yes	08/14/2020
2020-06-02-30-3	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Colt Sweeny, CT D02 - Redding Northern Regional Laboratory	08/05/2020	Ward Jenkins	Yes	08/14/2020
2020-06-02-30-6	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	08/04/2020	Ward Jenkins	Yes	08/14/2020
2020-06-02-30-8	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Mike Antonetti and A. Mills, CT D02 - Redding Northern Regional Laboratory	08/04/2020	Ward Jenkins	Yes	08/14/2020
2020-06-02-30-9	AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)	A. Mills and T. McCormick, CT D02 - Redding Northern Regional Laboratory	08/05/2020	Ward Jenkins	Yes	08/14/2020
2020-06-02-30-10	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	08/05/2020	Ward Jenkins	Yes	08/14/2020
2020-06-02-30-11	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	08/04/2020	Ward Jenkins	Yes	08/14/2020

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-06-02-30-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-06-02-30-2 CTM 204-June 2010 (Verified)
DIME Test ID: 2020-06-02-30-3 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-06-02-30-6 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-06-02-30-8 AASHTO T176-08 (Verified)
DIME Test ID: 2020-06-02-30-9 AASHTO T210-15 (Verified)
DIME Test ID: 2020-06-02-30-10 AASHTO T304-11 (Verified)
DIME Test ID: 2020-06-02-30-11 ASTM D4791-10 (Verified)