DIME - Sample Record for DIME Sample ID 2020-07-21-2

DIME » All Projects » Project - DEA: 081F13U4 » Sample 2020-07-21-2 » Sample Details

Sample Record

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2020-07-21-2

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214775 DEA: 081F13U4 EFIS: 0819000074
DIST-CO-RTE-PM	08-SBD-62,95-122.0/142.7,9.7/33.6
Award Date	05/04/2020
Closeout Date	06/30/2021
Work Description	COLD-IN PLACE RECYCLING AND PLACE RHMA-G.
Location Description	SAN BERNARDINO COUNTY ON ROUTE 62 FROM 3.8 MILES WEST OF ROUTE 95 TO ARIZONA STATE LINE AND ON ROUTE 95 FROM ROUTE 62 TO 2.0 MILES SOUTH OF TURTLE MOUNTAIN ROAD
QA Service Level	1 (Verified on 08/14/2020)

Sample Information

Sample Taken Date	07/21/2020	Sample Unique Key	2
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	07/22/2020
Sample type	Verification	A brief description of the sample	PSUE 3/4" RHMA-G-SP 1% Lime Slurry Aggregate
The quantity of what the sample constitutes	8 Bags Of Untreated & 3 Bags Coldfeed Treated	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Larry	Last name of sampler or witnessed by	Francisco
Title of sampler		Telephone number of sampler
Laboratory sample identification	0454G-20	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Granite-Indio	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	SMARA No. 91-33-0072
The fabricator's/manufacturer's product name for the sample	3/4 RHMA-G-SP	The fabricator/manufacturer designation for the sample
The plant number	1557	A detailed description of where the material sample was collected	Belt Cut at Granite Indio Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2020-07-21-2-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Sebastian Ferrer, Satish Jain, CT D08 - Fontana Southern Regional Laboratory	07/27/2020	Satish Jain	Yes	07/29/2020	Lime Treated Aggregate Gradation
2020-07-21-2-2	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	07/28/2020	Satish Jain	Yes	07/29/2020
2020-07-21-2-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	07/28/2020	Satish Jain	Yes	07/29/2020
2020-07-21-2-4	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory	07/28/2020	Satish Jain	Yes	07/29/2020
2020-07-21-2-5	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Sebastian Ferrer, CT D08 - Fontana Southern Regional Laboratory	07/28/2020	Satish Jain	Yes	07/29/2020
2020-07-21-2-6	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	07/28/2020	Satish Jain	Yes	07/29/2020
2020-07-21-2-7	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	07/28/2020	Satish Jain	Yes	07/29/2020
2020-07-21-2-8	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	07/28/2020	Satish Jain	Yes	07/29/2020

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-07-21-2-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-07-21-2-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-07-21-2-3 AASHTO T85-13 (Verified)
DIME Test ID: 2020-07-21-2-4 AASHTO T84-14 (Verified)
DIME Test ID: 2020-07-21-2-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-07-21-2-6 AASHTO T176-08 (Verified)
DIME Test ID: 2020-07-21-2-7 ASTM D4791-10 (Verified)
DIME Test ID: 2020-07-21-2-8 AASHTO T304-11 (Verified)