DIME - Sample Record for DIME Sample ID 2020-07-14-31

DIME » All Projects » Project - DEA: 024H3304 » Sample 2020-07-14-31 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Asphalt Binder Laboratory

DIME Sample ID 2020-07-14-31

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214726 DEA: 024H3304 EFIS: 0218000108
DIST-CO-RTE-PM	02-TRI-3-31.8/32.1
Award Date	04/22/2020
Closeout Date	10/21/2020
Work Description	PLACE HMA (TYPE A) FOR TURN LANE & CORRUGATED STEEL PIPE FOR DRAINAGE.
Location Description	TRINITY COUNTY NEAR WEAVERVILLE FROM FIVE CENT GULCH STREET TO 0.5 MILE SOUTH OF EAST WEAVER CREEK ROAD
QA Service Level	1 (Verified on 03/02/2020)

Sample Information

Sample Taken Date	07/14/2020	Sample Unique Key	31
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	07/21/2020
Sample type	Acceptance	A brief description of the sample	TEST Asphalt Binder
The quantity of what the sample constitutes	1 Can, #1 Test (002562)	From where was the sample collected	Source
First name of sampler or witnessed by	D	Last name of sampler or witnessed by	Lockett
Title of sampler	Consultant	Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Valero Benicia	Transportation Laboratory (TL) Number	002562
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Asphalt Binder	Performance Grade	PG 58-34 M
Modified	Yes	Lot number	2
Sublot number	1	Tank number	Not set
Time of sample	Not set	HMA Supplier	Not set
Certified Asphalt Supplier	Not set	Multigrade	Not set
Multigrade Type	Not set	Asphalt Binder Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2020-07-14-31-1	AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)	Ruben Macias, CT HQ - Sacramento Asphalt Binder Laboratory	07/29/2020	Gurpartap Grewal	Yes	09/23/2020
2020-07-14-31-2	AASHTO T301-13: Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer	Sunday Agude, CT HQ - Sacramento Asphalt Binder Laboratory	07/31/2020	Sunday Agude	Yes	09/23/2020
2020-07-14-31-3	AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)	Eva Torres, CT HQ - Sacramento Asphalt Binder Laboratory	08/25/2020	Justin Ellis	Yes	08/26/2020
2020-07-14-31-4	AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)	Eva Torres, CT HQ - Sacramento Asphalt Binder Laboratory	09/01/2020	Justin Ellis	Yes	09/02/2020	At 64 degrees Phase Angle = 66.4 degree and Dynamic Shear = 3.6321 kPa
2020-07-14-31-6	AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)	Sunday Agude, CT HQ - Sacramento Asphalt Binder Laboratory	08/31/2020	Justin Ellis	Yes	09/23/2020

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-07-14-31-1 AASHTO T240-17 (Verified)
DIME Test ID: 2020-07-14-31-2 AASHTO T301-13 (Verified)
DIME Test ID: 2020-07-14-31-3 AASHTO T315-16 (Verified)
DIME Test ID: 2020-07-14-31-4 AASHTO T315-16 (Verified)
DIME Test ID: 2020-07-14-31-6 AASHTO T313-19 (Verified)