Owner Lab
- CT D03 - North Region Materials Lab
DIME Sample ID 2020-05-13-33
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 213485 DEA: 032F9804 EFIS: 0312000026 |
DIST-CO-RTE-PM | 03-COL-20-31.7/32.9 |
Award Date | 10/15/2018 |
Closeout Date | 05/11/2022 |
Work Description | PAVEMENT REHABILITATION |
Location Description | COLUSA COUNTY IN AND NEAR COLUSA FROM 0.1 MILE EAST OF THE MARKET STREET/STATE ROUTE 20 INTERSECTION TO 0.1 MILE SOUTH OF BUTTE VISTA DRIVE |
QA Service Level | 1 (Verified on 01/08/2019) |
Sample Information
Sample Taken Date | 05/13/2020 |
Sample Unique Key | 33 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 05/19/2020 |
Sample type | Verification |
A brief description of the sample | 3/4 cold feed and rap |
The quantity of what the sample constitutes | 3 bags |
From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Brad |
Last name of sampler or witnessed by | McKeehan |
Title of sampler | |
Telephone number of sampler | |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Teichert Hallwood |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | 91-58-0006::HALLWOOD PLANT |
The fabricator's/manufacturer's product name for the sample | |
The fabricator/manufacturer designation for the sample | |
The plant number | |
A detailed description of where the material sample was collected | Agg sampler at drum plant |
Where the material sample would have been placed if not sampled | |
Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | |
Lot number | |
Sublot number | |
JMF Verification ID | JMF3513-2020-162 |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2020-05-13-33-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Jeff Herbert | CT D03 - North Region Materials Lab | 06/02/2020 | Jeff Herbert | Yes | 07/17/2020 | | |
2020-05-13-33-2 | AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis) | Jeff Herbert | CT D03 - North Region Materials Lab | 05/20/2020 | Jeff Herbert | Yes | 07/17/2020 | Raw RAP grading | |
2020-05-13-33-3 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Jeff Herbert | CT D03 - North Region Materials Lab | 06/08/2020 | Jeff Herbert | Yes | 07/17/2020 | | |
2020-05-13-33-4 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Jeff Herbert | CT D03 - North Region Materials Lab | 06/08/2020 | Jeff Herbert | Yes | 07/17/2020 | | |
2020-05-13-33-5 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Jeff Herbert | CT D03 - North Region Materials Lab | 06/03/2020 | Jeff Herbert | Yes | 07/17/2020 | | |
2020-05-13-33-6 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Jeff Herbert | CT D03 - North Region Materials Lab | 06/09/2020 | Jeff Herbert | Yes | 07/17/2020 | | |
2020-05-13-33-7 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Jeff Herbert | CT D03 - North Region Materials Lab | 06/02/2020 | Jeff Herbert | Yes | 07/17/2020 | | |
2020-05-13-33-8 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Jeff Herbert | CT D03 - North Region Materials Lab | 06/02/2020 | Jeff Herbert | Yes | 07/17/2020 | | |
2020-05-13-33-9 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Jeff Herbert | CT D03 - North Region Materials Lab | 06/02/2020 | Jeff Herbert | Yes | 07/17/2020 | | |
2020-05-13-33-10 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Jeff Herbert | CT D03 - North Region Materials Lab | 06/02/2020 | Jeff Herbert | Yes | 07/17/2020 | | |
87098871038710587106871078711387119871238713987143