Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2020-05-21-35

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214725
DEA: 020J1304
EFIS: 0219000064
DIST-CO-RTE-PM02-LAS-139-43.0/53.0
Award Date04/10/2020
Closeout Date10/06/2020
Work DescriptionCOLD IN-PLACE RECYCLING AND PLACE HMA (TYPE A).
Location DescriptionLASSEN COUNTY ABOUT 42 MILES NORTH OF SUSANVILLE FROM 3.8 MILES NORTH OF SLATE CREEK TO 4.7 MILES SOUTH OF WILLOW CREEK RANCH ROAD
QA Service Level1 (Verified on 03/02/2020)

Sample Information

Sample Taken Date05/21/2020 Sample Unique Key35
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/22/2020
Sample typeVerification A brief description of the sampleCombined 1/2-inch Type A Untreated Virgin Aggregate
The quantity of what the sample constitutesJMF Verification Renewal From where was the sample collectedSource
First name of sampler or witnessed byJimmy Last name of sampler or witnessed byMontana
Title of sampler Telephone number of sampler
Laboratory sample identificationD78440F Linked DIME Sample ID
The fabricator/manufacturer/facility nameShaw Pit Transportation Laboratory (TL) Number733194
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-25-0008
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedLab-Batched from Sized Untreated Aggregate Stockpiles
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size1/2 inch
The concrete mix design numberJMF 19-05-R1 Lot numberUnknown
Sublot numberUnknown Aggregate Mix NumberNot set

JMF Information

Verification IDJMF3513-2020-158 Date Created07/10/2020
JMF Submittal IDJMF3511-22-2020-233 JMF StatusSubmittal Rejected For Use
Producer Mix ID19-1278.105B Rejected Date07/17/2020

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-05-21-35-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Ward JenkinsCT D02 - Redding Northern Regional Laboratory07/13/2020Ward Jenkins
Yes
07/17/2020
2020-05-21-35-2CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Terry McCormickCT D02 - Redding Northern Regional Laboratory07/14/2020Ward Jenkins
Yes
07/17/2020
2020-05-21-35-3AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Arthur MillsCT D02 - Redding Northern Regional Laboratory07/14/2020Ward Jenkins
Yes
07/17/2020
2020-05-21-35-4AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Arthur MillsCT D02 - Redding Northern Regional Laboratory07/14/2020Ward Jenkins
Yes
07/17/2020
2020-05-21-35-5AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)D. Hickey and T. McCormickCT D02 - Redding Northern Regional Laboratory07/16/2020Ward Jenkins
Yes
07/17/2020
2020-05-21-35-6AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Colt SweenyCT D02 - Redding Northern Regional Laboratory07/14/2020Ward Jenkins
Yes
07/17/2020
2020-05-21-35-8AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Colt SweenyCT D02 - Redding Northern Regional Laboratory07/14/2020Ward Jenkins
Yes
07/17/2020
2020-05-21-35-9AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)A. Mills and T. McCormickCT D02 - Redding Northern Regional Laboratory07/15/2020Ward Jenkins
Yes
07/17/2020
2020-05-21-35-10AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Arthur MillsCT D02 - Redding Northern Regional Laboratory07/14/2020Ward Jenkins
Yes
07/17/2020
2020-05-21-35-11ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Arthur MillsCT D02 - Redding Northern Regional Laboratory07/14/2020Ward Jenkins
Yes
07/17/2020

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-05-21-35-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-05-21-35-2 CTM 204-June 2010 (Verified)
DIME Test ID: 2020-05-21-35-3 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-05-21-35-4 AASHTO T85-13 (Verified)
DIME Test ID: 2020-05-21-35-5 AASHTO T84-14 (Verified)
DIME Test ID: 2020-05-21-35-6 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-05-21-35-8 AASHTO T176-08 (Verified)
DIME Test ID: 2020-05-21-35-9 AASHTO T210-15 (Verified)
DIME Test ID: 2020-05-21-35-10 AASHTO T304-11 (Verified)
DIME Test ID: 2020-05-21-35-11 ASTM D4791-10 (Verified)