Owner Lab
- CT D02 - North Region Materials Lab
DIME Sample ID 2020-05-14-54
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 214589 DEA: 020J1604 |
DIST-CO-RTE-PM | 02-PLU-284-0.0/8.3 |
Award Date | 02/11/2020 |
Closeout Date | 10/06/2020 |
Work Description | PLACE HMA (TYPE A), PRECOATED AGGREGATE (SEAL COAT), HMA (LEVELING). |
Location Description | PLUMAS COUNTY NEAR CHILCOOT FROM ROUTE 70 TO 1 MILE NORTH OF LITTLE LAST CHANCE CREEK BRIDGE NUMBER 09-0072 |
QA Service Level | 1 (Verified on 01/22/2020) |
Sample Information
Sample Taken Date | 05/14/2020 |
Sample Unique Key | 54 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 05/18/2020 |
Sample type | Verification |
A brief description of the sample | 3/8-inch Type A HMA (PG 64-28 M) 15.0 RAP, 1.1 Lime |
The quantity of what the sample constitutes | JMF Verification |
From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Jimmy |
Last name of sampler or witnessed by | Montana |
Title of sampler | CGI |
Telephone number of sampler | |
Laboratory sample identification | D78434 |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Ward Lake Plant, Litchfield, CA |
Transportation Laboratory (TL) Number | 733192 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | Hot Mix Asphalt |
HMA Type | Type A HMA |
HMA Grading | 3/8 inch |
Lot number | Unknown |
Sublot number | Unknown |
JMF Verification ID | JMF3513-2020-155 |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2020-05-14-54-1 | AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content) | Ward Jenkins | CT D02 - North Region Materials Lab | 07/08/2020 | Ward Jenkins | Yes | 07/09/2020 | | |
2020-05-14-54-2 | AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity) | Darrell Valasek | CT D02 - North Region Materials Lab | 05/18/2020 | Ward Jenkins | Yes | 07/09/2020 | | |
2020-05-14-54-4 | AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity) | Darrell Valasek | CT D02 - North Region Materials Lab | 05/20/2020 | Ward Jenkins | Yes | 07/09/2020 | | |
2020-05-14-54-5 | AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void) | Darrell Valasek | CT D02 - North Region Materials Lab | 05/20/2020 | Ward Jenkins | Yes | 07/09/2020 | | |
2020-05-14-54-6 | AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content) | Valasek, Hickey, McCormick | CT D02 - North Region Materials Lab | 05/21/2020 | Ward Jenkins | Yes | 07/09/2020 | | |
2020-05-14-54-7 | AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track) | Darrell Valasek | CT D02 - North Region Materials Lab | 05/20/2020 | Ward Jenkins | Yes | 07/09/2020 | | |
2020-05-14-54-8 | AASHTO T312-14: Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor (Method of Compaction) | Darrell Valasek | CT D02 - North Region Materials Lab | 05/19/2020 | Ward Jenkins | Yes | 07/09/2020 | | |
86226860448606486091860938610086229