DIME - Sample Record for DIME Sample ID 2020-05-06-28

DIME » All Projects » Project - DEA: 020J2204 » Sample 2020-05-06-28 » Sample Details

Sample Record

Owner Lab

CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2020-05-06-28

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214377 DEA: 020J2204 EFIS: 0219000073
DIST-CO-RTE-PM	02-TRI-299-32.0/33.0, 32.0-33.0, 32/33, 32-33, 32.0 / 33.0
Award Date	01/14/2019
Closeout Date	12/23/2020
Work Description	Exc & stabilize rock slide or secure large rocks
Location Description	Not set
QA Service Level	1 (Verified on 09/16/2019)

Sample Information

Sample Taken Date	05/06/2020	Sample Unique Key	28
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/06/2020
Sample type	Department Acceptance	A brief description of the sample	1/2-inch Type A HMA (PG 64-16) 15.0 RAP, 1.3 Lime
The quantity of what the sample constitutes	Up to Five Days Paving	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Dorell	Last name of sampler or witnessed by	Harper
Title of sampler	Consultant	Telephone number of sampler
Laboratory sample identification	D78419	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Northstate Asphalt, Redding, CA	Transportation Laboratory (TL) Number	002554
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Hot Mix Asphalt	HMA Type	Type A HMA
HMA Grading	1/2 inch	Lot number	Unknown
Sublot number	Unknown	HMA Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date
2020-05-06-28-1	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Ward Jenkins, CT D02 - Redding Northern Regional Laboratory	05/07/2020	Ward Jenkins	Yes	06/26/2020
2020-05-06-28-2	AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	05/07/2020	Ward Jenkins	Yes	06/26/2020
2020-05-06-28-4	AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)	Ward Jenkins, CT D02 - Redding Northern Regional Laboratory	05/07/2020	Ward Jenkins	Yes	06/26/2020
2020-05-06-28-5	AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)	Terry McCormick, CT D02 - Redding Northern Regional Laboratory	05/08/2020	Ward Jenkins	Yes	06/26/2020
2020-05-06-28-6	AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	05/13/2020	Ward Jenkins	Yes	06/26/2020
2020-05-06-28-7	AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)	Terry McCormick, CT D02 - Redding Northern Regional Laboratory	05/09/2020	Ward Jenkins	Yes	06/26/2020

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-05-06-28-1 AASHTO T308-10 (Verified)
DIME Test ID: 2020-05-06-28-2 AASHTO T209-12 (Verified)
DIME Test ID: 2020-05-06-28-4 AASHTO T275-07r12 (Verified)
DIME Test ID: 2020-05-06-28-5 AASHTO T269-14 (Verified)
DIME Test ID: 2020-05-06-28-6 AASHTO T283-14 (Verified)
DIME Test ID: 2020-05-06-28-7 AASHTO T324-14 (Verified)