Owner Lab
- CT D02 - North Region Materials Lab
DIME Sample ID 2020-04-20-29
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 214589 DEA: 020J1604 |
DIST-CO-RTE-PM | 02-PLU-284-0.0/8.3 |
Award Date | 02/11/2020 |
Closeout Date | 10/06/2020 |
Work Description | PLACE HMA (TYPE A), PRECOATED AGGREGATE (SEAL COAT), HMA (LEVELING). |
Location Description | PLUMAS COUNTY NEAR CHILCOOT FROM ROUTE 70 TO 1 MILE NORTH OF LITTLE LAST CHANCE CREEK BRIDGE NUMBER 09-0072 |
QA Service Level | 1 (Verified on 01/22/2020) |
Sample Information
Sample Taken Date | 04/20/2020 |
Sample Unique Key | 29 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 04/21/2020 |
Sample type | Verification |
A brief description of the sample | Combined 1/2-inch Type A Untreated Virgin Aggregate |
The quantity of what the sample constitutes | JMF Verification |
From where was the sample collected | Source |
First name of sampler or witnessed by | Jimmy |
Last name of sampler or witnessed by | Montana |
Title of sampler | |
Telephone number of sampler | |
Laboratory sample identification | D78406F |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Ward Lake Pit |
Transportation Laboratory (TL) Number | 733181 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | 91-18-0008 |
The fabricator's/manufacturer's product name for the sample | Unknown |
The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown |
A detailed description of where the material sample was collected | Lab-Batched from Sized Untreated Aggregate Stockpiles |
Where the material sample would have been placed if not sampled | Unknown |
Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | JMF 20-04-S1 |
Lot number | Unknown |
Sublot number | Unknown |
JMF Verification ID | JMF3513-2020-139, JMF3513-2020-147, JMF3513-2020-149, JMF3513-2020-209 |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2020-04-20-29-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Ward Jenkins | CT D02 - North Region Materials Lab | 06/12/2020 | Ward Jenkins | Yes | 06/18/2020 | | |
2020-04-20-29-2 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | Terry McCormick | CT D02 - North Region Materials Lab | 06/17/2020 | Ward Jenkins | Yes | 06/18/2020 | | |
2020-04-20-29-3 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Arthur Mills | CT D02 - North Region Materials Lab | 06/15/2020 | Ward Jenkins | Yes | 06/18/2020 | | |
2020-04-20-29-4 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Arthur Mills | CT D02 - North Region Materials Lab | 06/16/2020 | Ward Jenkins | Yes | 06/18/2020 | | |
2020-04-20-29-5 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Dennis Hickey | CT D02 - North Region Materials Lab | 06/16/2020 | Ward Jenkins | Yes | 06/18/2020 | | |
2020-04-20-29-6 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Colt Sweeny | CT D02 - North Region Materials Lab | 06/16/2020 | Ward Jenkins | Yes | 06/18/2020 | | |
2020-04-20-29-7 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Terry McCormick | CT D02 - North Region Materials Lab | 06/15/2020 | Ward Jenkins | Yes | 06/18/2020 | | |
2020-04-20-29-8 | AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index) | Terry McCormick | CT D02 - North Region Materials Lab | 06/13/2020 | Ward Jenkins | Yes | 06/18/2020 | | |
2020-04-20-29-9 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Ward Jenkins | CT D02 - North Region Materials Lab | 06/15/2020 | Ward Jenkins | Yes | 06/18/2020 | | |
2020-04-20-29-10 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Arthur Mills | CT D02 - North Region Materials Lab | 06/15/2020 | Ward Jenkins | Yes | 06/18/2020 | | |
84044844428444884449844508445484455844578445884463