Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2020-06-12-1
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 212324
DEA: 033F5104
EFIS: 0313000020 |
|---|
| DIST-CO-RTE-PM | 03-YUB-20-R18.1/R20.1 |
|---|
| Award Date | 10/31/2019 |
|---|
| Closeout Date | Not set |
|---|
| Work Description | Construct bridge, realign curve & widen shoulders. |
|---|
| Location Description | Construction on state highway in Yuba County near Smartsville from the Yuba River Bridge to 0.3 mile east of Smartsville Road. |
|---|
| QA Service Level | 1 (Verified on 02/27/2020) |
|---|
Sample Information
| Sample Taken Date | 06/12/2020 |
Sample Unique Key | 1 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 06/16/2020 |
|---|
| Sample type | Quality Assurance |
A brief description of the sample | 3/4" gr Dh Nut |
|---|
| The quantity of what the sample constitutes | 4 |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | Paul |
Last name of sampler or witnessed by | Farinha |
|---|
| Title of sampler | ASSOC STEEL INSP |
Telephone number of sampler | 9167987102 |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Gerlinger |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
|---|
| Heat Number(s) | |
Nut Mfg. Lot Number(s) | 422611D |
|---|
| Washer Mfg. Lot Number(s) | |
Bolt Specification | n/a |
|---|
| Bolt Length(s) | Unknown |
Nut Specification | ASTM A563-15 |
|---|
| Washer Specification | n/a |
Finish | Hot Dipped ASTM F2329-15 |
|---|
| Diameter/Size | 3/4" |
Bolt Mfg. Lot Number | |
|---|
| Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2020-06-12-1-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | bewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/17/2020 | bewing | Yes | 06/17/2020 | Nut Proof |
|
| 2020-06-12-1-2 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/17/2020 | Brian Ewing | Yes | 06/17/2020 | |
|
| 2020-06-12-1-3 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/17/2020 | Brian Ewing | Yes | 06/17/2020 | |
|
| 2020-06-12-1-4 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/17/2020 | Brian Ewing | Yes | 06/17/2020 | |
|
| 2020-06-12-1-5 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/17/2020 | Brian Ewing | Yes | 06/17/2020 | |
|
| 2020-06-12-1-6 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/17/2020 | Brian Ewing | Yes | 06/17/2020 | |
|
| 2020-06-12-1-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/17/2020 | Brian Ewing | Yes | 06/17/2020 | |
|
| 2020-06-12-1-8 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/17/2020 | Brian Ewing | Yes | 06/17/2020 | |
|
| 2020-06-12-1-9 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/17/2020 | Brian Ewing | Yes | 06/17/2020 | |
|
842218429584296843068430784308843098431084311
