Sample Record

Owner Lab

  • CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2020-05-26-5

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214131
DEA: 080N69U4
EFIS: 0812000307
COOP: 081635
DIST-CO-RTE-PM08-RIV-60-22.1/22.6
Award Date05/01/2019
Closeout DateNot set
Work DescriptionImproving Operation efficiency and traffic flow in the SR-60 Truck Corridor in Moreno Valley. Widening inside and outside shoulders in 6 stages.
Location DescriptionR-60 Truck Climbing Lane . Construction of new east and west bound truck lanes from Gilman Springs road to 1.37 miles west if Jack Rabbit trail. Existing shoulders will be widened to standard 10 ft inside and 12 ft outside respectively.
QA Service Level2 (Verified on 04/30/2019)

Sample Information

Sample Taken Date05/26/2020 Sample Unique Key5
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/27/2020
Sample typeVerification A brief description of the sample3/4 HMA-A-SP R15 Aggregate and RAP
The quantity of what the sample constitutesJMF 8 Bags From where was the sample collectedManufacturer
First name of sampler or witnessed byAll American Asphalt Perris Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0277A-20 Linked DIME Sample ID
The fabricator/manufacturer/facility nameAll American Asphalt Perris Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-33-0005::ALL AMERICAN ASPHALT
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R15 The fabricator/manufacturer designation for the sampleUnknown
The plant number105927 A detailed description of where the material sample was collectedBelt Cut at All American Perris Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-05-26-5-11AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Edmond Jabbour, Satish Jain, CT D08 - Fontana Southern Regional Laboratory06/19/2020Michael Magana
Yes
06/23/2020Virgin Aggregate Gradation
2020-05-26-5-12THIS TEST HAS BEEN SUPERSEDED.
CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Edmond Jabbour, Satish Jain, CT D08 - Fontana Southern Regional Laboratory06/19/2020Michael Magana
Yes
06/23/2020THIS TEST HAS BEEN SUPERSEDED.
Combined RAP/Virgin Aggregate Gradation w/Correlation Factors Applied
2020-05-26-5-13CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesEdmond Jabbour, Satish Jain, CT D08 - Fontana Southern Regional Laboratory06/19/2020Michael Magana
Yes
06/23/2020Combined RAP/Virgin Aggregate Gradation w/Correlation Factors Applied

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-05-26-5-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-05-26-5-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-05-26-5-3 AASHTO T85-13 (Verified)
DIME Test ID: 2020-05-26-5-4 AASHTO T84-14 (Verified)
DIME Test ID: 2020-05-26-5-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-05-26-5-6 AASHTO T176-08 (Verified)
DIME Test ID: 2020-05-26-5-7 ASTM D4791-10 (Verified)
DIME Test ID: 2020-05-26-5-8 AASHTO T304-11 (Verified)
DIME Test ID: 2020-05-26-5-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2020-05-26-5-10 CTM 202-November 2011 (Verified)
DIME Test ID: 2020-05-26-5-11 AASHTO T27-14 (Verified)
DIME Test ID: 2020-05-26-5-12 CTM 202-November 2011 (Verified)
DIME Test ID: 2020-05-26-5-13 CTM 202-November 2011 (Verified)