Sample Record

Owner Lab

  • CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2020-05-26-5

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214131
DEA: 080N69U4
EFIS: 0812000307
COOP: 081635
DIST-CO-RTE-PM08-RIV-60-22.1/22.6
Award Date05/01/2019
Closeout DateNot set
Work DescriptionImproving Operation efficiency and traffic flow in the SR-60 Truck Corridor in Moreno Valley. Widening inside and outside shoulders in 6 stages.
Location DescriptionR-60 Truck Climbing Lane . Construction of new east and west bound truck lanes from Gilman Springs road to 1.37 miles west if Jack Rabbit trail. Existing shoulders will be widened to standard 10 ft inside and 12 ft outside respectively.
QA Service Level2 (Verified on 04/30/2019)

Sample Information

Sample Taken Date05/26/2020 Sample Unique Key5
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/27/2020
Sample typeVerification A brief description of the sample3/4 HMA-A-SP R15 Aggregate and RAP
The quantity of what the sample constitutesJMF 8 Bags From where was the sample collectedManufacturer
First name of sampler or witnessed byAll American Asphalt Perris Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0277A-20 Linked DIME Sample ID
The fabricator/manufacturer/facility nameAll American Asphalt Perris Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-33-0005::ALL AMERICAN ASPHALT
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R15 The fabricator/manufacturer designation for the sampleUnknown
The plant number105927 A detailed description of where the material sample was collectedBelt Cut at All American Perris Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-05-26-5-1THIS TEST HAS BEEN SUPERSEDED.
AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Sebastian Ferrer, Satish JainCT D08 - Fontana Southern Regional Laboratory06/02/2020Michael Magana
Yes
06/09/2020THIS TEST HAS BEEN SUPERSEDED.
Virgin Aggregate Gradation
2020-05-26-5-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Satish JainCT D08 - Fontana Southern Regional Laboratory06/03/2020Michael Magana
Yes
06/09/2020
2020-05-26-5-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Larry DiazCT D08 - Fontana Southern Regional Laboratory06/03/2020Michael Magana
Yes
06/09/2020
2020-05-26-5-4AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Friday OfoegbuCT D08 - Fontana Southern Regional Laboratory06/03/2020Michael Magana
Yes
06/09/2020
2020-05-26-5-5AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Sebastian FerrerCT D08 - Fontana Southern Regional Laboratory06/03/2020Michael Magana
Yes
06/09/2020
2020-05-26-5-6AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Michael MaganaCT D08 - Fontana Southern Regional Laboratory06/04/2020Michael Magana
Yes
06/09/2020
2020-05-26-5-7ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Satish JainCT D08 - Fontana Southern Regional Laboratory06/03/2020Michael Magana
Yes
06/09/2020
2020-05-26-5-8AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Satish JainCT D08 - Fontana Southern Regional Laboratory06/03/2020Michael Magana
Yes
06/09/2020
2020-05-26-5-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesSatish JainCT D08 - Fontana Southern Regional Laboratory06/03/2020Michael Magana
Yes
06/09/2020RAP Gradation After Ignition Oven
2020-05-26-5-10THIS TEST HAS BEEN SUPERSEDED.
CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Sebastain Ferrer, Satish JainCT D08 - Fontana Southern Regional Laboratory06/02/2020Michael Magana
Yes
06/09/2020THIS TEST HAS BEEN SUPERSEDED.
Combined RAP/Virgin Aggregate Gradation w/Correlation Factors Applied

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-05-26-5-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-05-26-5-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-05-26-5-3 AASHTO T85-13 (Verified)
DIME Test ID: 2020-05-26-5-4 AASHTO T84-14 (Verified)
DIME Test ID: 2020-05-26-5-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-05-26-5-6 AASHTO T176-08 (Verified)
DIME Test ID: 2020-05-26-5-7 ASTM D4791-10 (Verified)
DIME Test ID: 2020-05-26-5-8 AASHTO T304-11 (Verified)
DIME Test ID: 2020-05-26-5-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2020-05-26-5-10 CTM 202-November 2011 (Verified)
DIME Test ID: 2020-05-26-5-11 AASHTO T27-14 (Verified)
DIME Test ID: 2020-05-26-5-12 CTM 202-November 2011 (Verified)
DIME Test ID: 2020-05-26-5-13 CTM 202-November 2011 (Verified)