DIME - Sample Record for DIME Sample ID 2020-03-28-4

DIME » All Projects » Project - DEA: 120H1004 » Sample 2020-03-28-4 » Sample Details

Sample Record

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2020-03-28-4

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 208973 DEA: 120H1004 EFIS: 1200000180 COOP: 120670
DIST-CO-RTE-PM	12-ORA-405,73,405,605-9.3/24.3
Award Date	11/07/2016
Closeout Date	Not set
Work Description	(Alternative Delivery) San Diego Freeway (I-405) Improvement Project SR-73 to I-605, Design Build Project, Administered by Orange County Transportation Authority, Caltrans METS to perform Source Inspection per RFP.
Location Description	Orange and Los Angeles Counties: 12-ORA-405 PM 9.3/24.2 / 07-LA-405 PM 0.0/1.2 12-ORA-22 PM R0.7/R3.8 / 12-ORA-22 PM R0.5/R0.7 12-ORA-73 PM R27.2/R27.8 / 12-ORA-605 PM 3.5/R1.6 07-LA-605 PM R0.0/R1.2
QA Service Level	1 (Verified on 09/10/2015)

Sample Information

Sample Taken Date	03/28/2020	Sample Unique Key	4
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/24/2020
Sample type	Verification	A brief description of the sample	1/2 RHMA-G-SP Aggregate
The quantity of what the sample constitutes	JMF 4 Bags	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	All American Irvine	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0199G-20	Linked DIME Sample ID
The fabricator/manufacturer/facility name	All American Asphalt Irvine	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0005::ALL AMERICAN ASPHALT
The fabricator's/manufacturer's product name for the sample	1/2 RHMA-G-SP	The fabricator/manufacturer designation for the sample	Unknown
The plant number	106836	A detailed description of where the material sample was collected	Belt Cut at All American Irvine Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2020-03-28-4-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory	04/27/2020	Michael Magana	Yes	05/06/2020	Virgin Aggregate Gradation
2020-03-28-4-2	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	04/29/2020	Michael Magana	Yes	05/06/2020
2020-03-28-4-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	04/28/2020	Michael Magana	Yes	05/06/2020
2020-03-28-4-4	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Michael Magana, CT D08 - Fontana Southern Regional Laboratory	04/30/2020	Michael Magana	Yes	05/06/2020
2020-03-28-4-5	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory	04/27/2020	Michael Magana	Yes	05/06/2020
2020-03-28-4-6	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory	04/27/2020	Michael Magana	Yes	05/06/2020
2020-03-28-4-7	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	04/29/2020	Michael Magana	Yes	05/06/2020
2020-03-28-4-8	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Saish Jain, CT D08 - Fontana Southern Regional Laboratory	04/29/2020	Michael Magana	Yes	05/06/2020

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-03-28-4-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-03-28-4-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-03-28-4-3 AASHTO T85-13 (Verified)
DIME Test ID: 2020-03-28-4-4 AASHTO T84-14 (Verified)
DIME Test ID: 2020-03-28-4-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-03-28-4-6 AASHTO T176-08 (Verified)
DIME Test ID: 2020-03-28-4-7 ASTM D4791-10 (Verified)
DIME Test ID: 2020-03-28-4-8 AASHTO T304-11 (Verified)