Sample Record
Owner Lab
- CT D01 - Crescent City Field Laboratory
DIME Sample ID 2020-04-17-7
Project Information
Project Identifiers | Project ID: 99999 DEA: 0322222 |
---|---|
DIST-CO-RTE-PM | 03-SAC,OMG-888,99,80-0.6-0.6 |
Award Date | Not set |
Closeout Date | Not set |
Work Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
Location Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
QA Service Level | (Verified on 04/05/2013) |
Sample Information
Sample Taken Date | 04/17/2020 | Sample Unique Key | 7 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/20/2020 |
Sample type | Department Acceptance | A brief description of the sample | 3/4" base |
The quantity of what the sample constitutes | 50 sqyd | From where was the sample collected | Job Site |
First name of sampler or witnessed by | Kenneth | Last name of sampler or witnessed by | Sutterfield |
Title of sampler | ARE | Telephone number of sampler | 7073570365 |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Tidewater Smith River | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | SMARA 91 19 0016 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | Jobsite |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Unknown | Lot number | Unknown |
Sublot number | Unknown | Aggregate Mix Number | Not set |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2020-04-17-7-1 | CTM 217-June 2011: Method of Test for Sand Equivalent | Ken Sutterfield, CT D01 - Crescent City Field Laboratory | 04/21/2020 | Ken Sutterfield | No | Info | ||
2020-04-17-7-2 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Ken Sutterfield, CT D01 - Crescent City Field Laboratory | 04/21/2020 | Ken Sutterfield | No | Info | ||
2020-04-17-7-3 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Ken Sutterfield, CT D01 - Crescent City Field Laboratory | 04/21/2020 | Ken Sutterfield | No | Info | ||
2020-04-17-7-4 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Ken Sutterfield, CT D01 - Crescent City Field Laboratory | 04/21/2020 | Ken Sutterfield | No | Info | ||
2020-04-17-7-5 | CTM 217-June 2011: Method of Test for Sand Equivalent | Ken Sutterfield, CT D01 - Crescent City Field Laboratory | 04/21/2020 | Ken Sutterfield | No | Info | ||
2020-04-17-7-6 | CTM 227-December 2014: Method of Test for Evaluating Cleanness of Coarse Aggregate (Cleanness) | Ken Sutterfield, CT D01 - Crescent City Field Laboratory | 04/21/2020 | Ken Sutterfield | No | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2020-04-17-7-1 CTM 217-June 2011
DIME Test ID: 2020-04-17-7-2 CTM 202-November 2011
DIME Test ID: 2020-04-17-7-3 CTM 202-November 2011
DIME Test ID: 2020-04-17-7-4 CTM 202-November 2011
DIME Test ID: 2020-04-17-7-5 CTM 217-June 2011
DIME Test ID: 2020-04-17-7-6 CTM 227-December 2014