Sample Record

Owner Lab

  • CT HQ - QASI Sacramento Field Office

DIME Sample ID 2020-03-24-8

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214421
DEA: 01362704
EFIS: 0116000031
DIST-CO-RTE-PM01-MEN-1-62.2/R78.9
Award Date12/23/2019
Closeout Date03/09/2021
Work DescriptionHOT MIX ASPHALT OVERLAY.
Location DescriptionMENDOCINO COUNTY NEAR FORT BRAGG FROM 0.1 MILE NORTH OF PUDDING CREEK BRIDGE TO 0.6 MILE NORTH OF WAGES CREEK BRIDGE
QA Service Level1 (Verified on 09/19/2019)

Sample Information

Sample Taken Date03/24/2020 Sample Unique Key8
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/10/2020
Sample typeQuality Assurance A brief description of the sampleASTM A193 B7 Stud
The quantity of what the sample constitutes200 pieces From where was the sample collectedFabricator
First name of sampler or witnessed byMahlon Last name of sampler or witnessed byLindenmuth
Title of samplerQA Inspector Telephone number of sampler646-740-3704
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameBAY STANARD MANUFACTURING Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)N/A
Heat Number(s)10599080 Nut Mfg. Lot Number(s)N/A
Washer Mfg. Lot Number(s)N/A Bolt SpecificationASTM A193 B7
Bolt Length(s)18" Nut SpecificationN/A
Washer SpecificationN/A FinishASTM A153 HDG
Diameter/Size3/4" Bolt Mfg. Lot Number2002171A-4
Rocap Test Requirement(s)NO Lubricant Requirements(s)NO

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-03-24-8-1ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)bewingCT HQ - Sacramento Structural Materials Testing Laboratory04/15/2020bewing
Yes
04/15/2020A193 B7 Stud
2020-03-24-8-2ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)bewingCT HQ - Sacramento Structural Materials Testing Laboratory04/15/2020bewing
Yes
04/15/2020A193 B7 Stud
2020-03-24-8-3ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)bewingCT HQ - Sacramento Structural Materials Testing Laboratory04/15/2020bewing
Yes
04/15/2020A193 B7 Stud
2020-03-24-8-4ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)bewingCT HQ - Sacramento Structural Materials Testing Laboratory04/15/2020bewing
Yes
04/15/2020A193 B7 Stud
2020-03-24-8-5ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)bewingCT HQ - Sacramento Structural Materials Testing Laboratory04/15/2020bewing
Yes
04/15/2020A193 B7 Stud
2020-03-24-8-6ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)bewingCT HQ - Sacramento Structural Materials Testing Laboratory04/15/2020bewing
Yes
04/15/2020A193 B7 Stud
2020-03-24-8-7ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)bewingCT HQ - Sacramento Structural Materials Testing Laboratory04/15/2020bewing
Yes
04/15/2020A193 B7 Stud
2020-03-24-8-8ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)bewingCT HQ - Sacramento Structural Materials Testing Laboratory04/15/2020bewing
Yes
04/15/2020A193 B7 Stud
2020-03-24-8-9ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)bewingCT HQ - Sacramento Structural Materials Testing Laboratory04/15/2020bewing
Yes
04/15/2020A193 B7 Stud
2020-03-24-8-10ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory04/15/2020Brian Ewing
Yes
04/15/2020

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-03-24-8-1 ASTM F606-14 (Verified)
DIME Test ID: 2020-03-24-8-2 ASTM F606-14 (Verified)
DIME Test ID: 2020-03-24-8-3 ASTM F606-14 (Verified)
DIME Test ID: 2020-03-24-8-4 ASTM F606-14 (Verified)
DIME Test ID: 2020-03-24-8-5 ASTM F606-14 (Verified)
DIME Test ID: 2020-03-24-8-6 ASTM F606-14 (Verified)
DIME Test ID: 2020-03-24-8-7 ASTM F606-14 (Verified)
DIME Test ID: 2020-03-24-8-8 ASTM F606-14 (Verified)
DIME Test ID: 2020-03-24-8-9 ASTM F606-14 (Verified)
DIME Test ID: 2020-03-24-8-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-03-24-8-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-03-24-8-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-03-24-8-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-03-24-8-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-03-24-8-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-03-24-8-16 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-03-24-8-17 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-03-24-8-18 ASME B1.2-83r01 (Verified)