Sample Record

Owner Lab

  • CT - Southern Regional Laboratory

DIME Sample ID 2020-04-02-9

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 209695
DEA: 08347704
EFIS: 0800000616
DIST-CO-RTE-PM08-SBD-SR-58-0/12.9
Award Date11/10/2017
Closeout Date01/14/2021
Work Description(Alternative Delivery) The CMGC project will upgrade SR 58 from 2- to 4-lanes in San Bernardino County from the Kern County line to 7.5 miles east of US-395.
Location DescriptionSR-58 / 395 Kramer Junction project. In San Bernardino County from the Kern County line to 7.5 miles east of US-395.
QA Service Level1 (Verified on 12/01/2017)

Sample Information

Sample Taken Date04/02/2020 Sample Unique Key9
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/08/2020
Sample typeVerification A brief description of the sample3/4 HMA-A-SP R15 Aggregate/RAP
The quantity of what the sample constitutesJMF 15 Bags From where was the sample collectedManufacturer
First name of sampler or witnessed byBlue Diamond Materials Victorville Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0190A-20 Linked DIME Sample ID
The fabricator/manufacturer/facility nameBlue Diamond Materials-Victorville Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-36-0106::WHITE MOUNTAIN QUARRY
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R15 The fabricator/manufacturer designation for the sampleUnknown
The plant number300154 LSM A detailed description of where the material sample was collectedBelt Cut at Blue Diamond Victorville Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown JMF Verification ID

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-04-02-9-1THIS TEST HAS BEEN SUPERSEDED.
AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Larry DiazCT - Southern Regional Laboratory04/15/2020Michael Magana
Yes
05/06/2020THIS TEST HAS BEEN SUPERSEDED.
Virgin Aggregate Gradation
2020-04-02-9-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Michael MaganaCT - Southern Regional Laboratory04/17/2020Michael Magana
Yes
05/06/2020
2020-04-02-9-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Larry DiazCT - Southern Regional Laboratory04/13/2020Michael Magana
Yes
05/06/2020
2020-04-02-9-4AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Michael MaganaCT - Southern Regional Laboratory04/14/2020Michael Magana
Yes
05/06/2020
2020-04-02-9-5AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Michael MaganaCT - Southern Regional Laboratory04/14/2020Michael Magana
Yes
05/06/2020
2020-04-02-9-6AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Larry DiazCT - Southern Regional Laboratory04/14/2020Michael Magana
Yes
05/06/2020
2020-04-02-9-7ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Michael MaganaCT - Southern Regional Laboratory04/17/2020Michael Magana
Yes
05/06/2020
2020-04-02-9-8AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Michael MaganaCT - Southern Regional Laboratory04/17/2020Michael Magana
Yes
05/06/2020
2020-04-02-9-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesKiet PhanCT - Southern Regional Laboratory04/16/2020Michael Magana
Yes
05/06/2020RAP Gradation After Ignition Oven
2020-04-02-9-10THIS TEST HAS BEEN SUPERSEDED.
CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Larry DiazCT - Southern Regional Laboratory04/15/2020Michael Magana
Yes
05/06/2020THIS TEST HAS BEEN SUPERSEDED.
Combined Virgin Aggregate/RAP Gradation