Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2020-03-23-3
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 208973
DEA: 120H1004
EFIS: 1200000180
COOP: 120670 |
|---|
| DIST-CO-RTE-PM | 12-ORA-405,73,405,605-9.3/24.3 |
|---|
| Award Date | 11/07/2016 |
|---|
| Closeout Date | Not set |
|---|
| Work Description | (Alternative Delivery) San Diego Freeway (I-405) Improvement Project SR-73 to I-605, Design Build Project, Administered by Orange County Transportation Authority, Caltrans METS to perform Source Inspection per RFP. |
|---|
| Location Description | Orange and Los Angeles Counties: 12-ORA-405 PM 9.3/24.2 / 07-LA-405 PM 0.0/1.2 12-ORA-22 PM R0.7/R3.8 / 12-ORA-22 PM R0.5/R0.7 12-ORA-73 PM R27.2/R27.8 / 12-ORA-605 PM 3.5/R1.6 07-LA-605 PM R0.0/R1.2 |
|---|
| QA Service Level | 1 (Verified on 09/10/2015) |
|---|
Sample Information
| Sample Taken Date | 03/23/2020 |
Sample Unique Key | 3 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 03/27/2020 |
|---|
| Sample type | Quality Assurance |
A brief description of the sample | F1554 anchor rod |
|---|
| The quantity of what the sample constitutes | 1 |
From where was the sample collected | Manufacturer |
|---|
| First name of sampler or witnessed by | Jeri |
Last name of sampler or witnessed by | Richardson |
|---|
| Title of sampler | |
Telephone number of sampler | |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | EDSCO Fasteners |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
|---|
| Heat Number(s) | 3089007 |
Nut Mfg. Lot Number(s) | DEAN DCWD |
|---|
| Washer Mfg. Lot Number(s) | 317106 |
Bolt Specification | F1554 GR55 |
|---|
| Bolt Length(s) | 56" |
Nut Specification | A563 A194 |
|---|
| Washer Specification | F436 HDG |
Finish | HDG and Plain |
|---|
| Diameter/Size | 2.25" |
Bolt Mfg. Lot Number | |
|---|
| Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2020-03-23-3-1 | ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/02/2020 | spaine | Yes | 04/02/2020 | |
|
| 2020-03-23-3-2 | ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/02/2020 | spaine | Yes | 04/02/2020 | |
|
| 2020-03-23-3-3 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/02/2020 | Steven Paine | Yes | 04/02/2020 | |
|
| 2020-03-23-3-4 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/02/2020 | Steven Paine | Yes | 04/02/2020 | |
|
| 2020-03-23-3-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/02/2020 | Steven Paine | Yes | 04/02/2020 | |
|
| 2020-03-23-3-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/02/2020 | Steven Paine | Yes | 04/02/2020 | |
|
| 2020-03-23-3-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/02/2020 | Steven Paine | Yes | 04/02/2020 | |
|
| 2020-03-23-3-8 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/02/2020 | Steven Paine | Yes | 04/02/2020 | |
|
| 2020-03-23-3-9 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/02/2020 | Steven Paine | Yes | 04/02/2020 | |
|
| 2020-03-23-3-10 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/02/2020 | Steven Paine | Yes | 04/02/2020 | |
|
79319793207932179322793237932479325793267932779328
