DIME » All Projects » Project - DEA: 024C40V4 » Sample 2019-07-30-17 » Sample Details

Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2019-07-30-17

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 213469
DEA: 024C40V4
EFIS: 0218000125
DIST-CO-RTE-PM02-SHA-5-R3.8/R11.7
Award Date11/06/2018
Closeout Date08/16/2023
Work DescriptionWIDEN TO 6 LANES, BRIDGE REPLACEMENT AND WIDENING AND ROADWAY REHAB
Location DescriptionSHASTA COUNTY IN AND NEAR ANDERSON FROM ROUTE 5/273 SEPARATION TO 0.4 MILE SOUTH OF CHURN CREEK ROAD OVERCROSSING
QA Service Level1 (Verified on 12/31/2018)

Sample Information

Sample Taken Date07/30/2019 Sample Unique Key17
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/30/2019
Sample typeVerification A brief description of the sample1/2-inch Type A HMA (PG 64-10), 15% RAP, 1.0% Lime
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byColt Last name of sampler or witnessed bySweeny
Title of sampler Telephone number of sampler
Laboratory sample identificationD78054 Linked DIME Sample ID
The fabricator/manufacturer/facility nameFawndale Rock and Asphalt - Redding, CA Transportation Laboratory (TL) Number736160
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot numberUnknown
Sublot numberUnknown HMA Mix NumberNot set

JMF Information

Verification IDJMF3513-2020-97 Date Created03/09/2020
JMF Submittal IDJMF3511-22-2020-139 JMF StatusSubmittal Authorized For Use
Producer Mix ID19-1001.314 Authorized Date08/26/2019

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2019-07-30-17-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory08/20/2019Ward Jenkins
Yes
03/10/2020
2019-07-30-17-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory08/16/2019Ward Jenkins
Yes
03/10/2020
2019-07-30-17-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory08/01/2019Ward Jenkins
Yes
03/10/2020
2019-07-30-17-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory08/01/2019Ward Jenkins
Yes
03/10/2020
2019-07-30-17-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)D. Valasek and T. McCormick, CT D02 - Redding Northern Regional Laboratory08/05/2019Ward Jenkins
Yes
03/10/2020
2019-07-30-17-6AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory08/02/2019Ward Jenkins
Yes
03/10/2020

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2019-07-30-17-1 AASHTO T308-10 (Verified)
DIME Test ID: 2019-07-30-17-2 AASHTO T209-12 (Verified)
DIME Test ID: 2019-07-30-17-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2019-07-30-17-4 AASHTO T269-14 (Verified)
DIME Test ID: 2019-07-30-17-5 AASHTO T283-14 (Verified)
DIME Test ID: 2019-07-30-17-6 AASHTO T324-14 (Verified)