Sample Record

Owner Lab

  • CT - Southern Regional Laboratory

DIME Sample ID 2020-01-30-33

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 208973
DEA: 120H1004
EFIS: 1200000180
COOP: 120670
DIST-CO-RTE-PM12-ORA-405,73,405,605-9.3/24.3
Award Date11/07/2016
Closeout DateNot set
Work Description(Alternative Delivery) San Diego Freeway (I-405) Improvement Project SR-73 to I-605, Design Build Project, Administered by Orange County Transportation Authority, Caltrans METS to perform Source Inspection per RFP.
Location DescriptionOrange and Los Angeles Counties: 12-ORA-405 PM 9.3/24.2 / 07-LA-405 PM 0.0/1.2 12-ORA-22 PM R0.7/R3.8 / 12-ORA-22 PM R0.5/R0.7 12-ORA-73 PM R27.2/R27.8 / 12-ORA-605 PM 3.5/R1.6 07-LA-605 PM R0.0/R1.2
QA Service Level1 (Verified on 09/10/2015)

Sample Information

Sample Taken Date01/30/2020 Sample Unique Key33
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing02/21/2020
Sample typeVerification A brief description of the sample3/4 HMA-A-SP R15
The quantity of what the sample constitutesJMF 8 Bags From where was the sample collectedManufacturer
First name of sampler or witnessed byAll American Corona Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0144A-20 Linked DIME Sample ID
The fabricator/manufacturer/facility nameAll American Asphalt Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-33-0005::ALL AMERICAN ASPHALT
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R15 The fabricator/manufacturer designation for the sample105793
The plant numberUnknown A detailed description of where the material sample was collectedBelt Cut at All American Asphalt Corona Plant
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown JMF Verification ID

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-01-30-33-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Edmond Jabbour, Satish JainCT - Southern Regional Laboratory02/27/2020Michael Magana
Yes
03/17/2020Virgin Aggregate Gradation
2020-01-30-33-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Satish JainCT - Southern Regional Laboratory03/04/2020Michael Magana
Yes
03/17/2020
2020-01-30-33-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Larry DiazCT - Southern Regional Laboratory02/28/2020Michael Magana
Yes
03/17/2020
2020-01-30-33-4AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Danilo FerrerCT - Southern Regional Laboratory02/28/2020Michael Magana
Yes
03/17/2020
2020-01-30-33-5AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Larry DiazCT - Southern Regional Laboratory02/29/2020Michael Magana
Yes
03/17/2020
2020-01-30-33-6AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Husni AnkirCT - Southern Regional Laboratory02/27/2020Michael Magana
Yes
03/17/2020
2020-01-30-33-7ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Satish JainCT - Southern Regional Laboratory02/28/2020Michael Magana
Yes
03/17/2020
2020-01-30-33-8AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Satish JainCT - Southern Regional Laboratory02/28/2020Michael Magana
Yes
03/17/2020
2020-01-30-33-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesMichael MaganaCT - Southern Regional Laboratory02/28/2020Michael Magana
Yes
03/17/2020RAP Gradation After Ignition Oven
2020-01-30-33-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesMichael Magana, Edmond Jabbour, Satish JainCT - Southern Regional Laboratory02/27/2020Michael Magana
Yes
03/17/2020Combined RAP/Virgin Aggregate w/Correlation Factors Applied