DIME - Sample Record for DIME Sample ID 2020-02-08-2

DIME » All Projects » Project - DEA: 120N3204 » Sample 2020-02-08-2 » Sample Details

Sample Record

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2020-02-08-2

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214397 DEA: 120N3204 EFIS: 1213000196
DIST-CO-RTE-PM	12-ORA-91-R9.8/R18.9
Award Date	11/07/2019
Closeout Date	07/01/2022
Work Description	CONST PRECAST SLAB REPLACEMENT, COLD PLANE AC PVMT AND PLACE RHMA.
Location Description	ORANGE COUNTY IN ANAHEIM AND YORBA LINDA FROM 0.3 MILE WEST OF LAKEVIEW AVENUE OVERCROSSING TO RIVERSIDE COUNTY LINE
QA Service Level	1 (Verified on 12/02/2019)

Sample Information

Sample Taken Date	02/08/2020	Sample Unique Key	2
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	02/21/2020
Sample type	Verification	A brief description of the sample	1/2 WRHMA-G-SP
The quantity of what the sample constitutes	JMF3 Bags	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	RJ Noble Orange	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0143-20	Linked DIME Sample ID
The fabricator/manufacturer/facility name	RJ Noble Orange	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0035, 91-33-0039
The fabricator's/manufacturer's product name for the sample	1/2 WRHMA-G-SP	The fabricator/manufacturer designation for the sample	50R003ARSPWEO
The plant number	Unknown	A detailed description of where the material sample was collected	Belt Cut at RJ Noble Orange Plant
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2020-02-08-2-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Edmond Jabbour, CT D08 - Fontana Southern Regional Laboratory	02/26/2020	Michael Magana	Yes	03/17/2020	Virgin Aggregate Gradation
2020-02-08-2-2	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	02/27/2020	Michael Magana	Yes	03/17/2020
2020-02-08-2-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	02/27/2020	Michael Magana	Yes	03/17/2020
2020-02-08-2-4	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory	02/27/2020	Michael Magana	Yes	03/17/2020
2020-02-08-2-5	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Michael Magana, CT D08 - Fontana Southern Regional Laboratory	02/27/2020	Michael Magana	Yes	03/17/2020
2020-02-08-2-6	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Kiet Phan, CT D08 - Fontana Southern Regional Laboratory	02/26/2020	Michael Magana	Yes	03/17/2020
2020-02-08-2-7	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	02/27/2020	Michael Magana	Yes	03/17/2020
2020-02-08-2-8	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	02/27/2020	Michael Magana	Yes	03/17/2020

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-02-08-2-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-02-08-2-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-02-08-2-3 AASHTO T85-13 (Verified)
DIME Test ID: 2020-02-08-2-4 AASHTO T84-14 (Verified)
DIME Test ID: 2020-02-08-2-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-02-08-2-6 AASHTO T176-08 (Verified)
DIME Test ID: 2020-02-08-2-7 ASTM D4791-10 (Verified)
DIME Test ID: 2020-02-08-2-8 AASHTO T304-11 (Verified)