Owner Lab
- CT QASI - Los Angeles Field Laboratory
DIME Sample ID 2020-02-13-8
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 208945
DEA: 07288604
EFIS: 0700021080
COOP: 074663 |
|---|
| DIST-CO-RTE-PM | 07-LA-710-6.0-9.4 |
|---|
| Award Date | 09/02/2011 |
|---|
| Closeout Date | Not set |
|---|
| Work Description | Gerald Desmond Bridge Replacement - A Design Build project. IQA samples will be selected by Port/Caltrans representatives and sent to Translab for testing. |
|---|
| Location Description | Port of Long Beach (District 7) |
|---|
| QA Service Level | 1 (Verified on 06/03/2013) |
|---|
Sample Information
| Sample Taken Date | 02/13/2020 |
Sample Unique Key | 8 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 02/13/2020 |
|---|
| Sample type | Independent Assurance |
A brief description of the sample | 1-1/4-7 x 3-1/4 A490 bolt assembly |
|---|
| The quantity of what the sample constitutes | 4 |
From where was the sample collected | Job Site |
|---|
| First name of sampler or witnessed by | Andrew |
Last name of sampler or witnessed by | Webster |
|---|
| Title of sampler | |
Telephone number of sampler | 9254189838 |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | K-T Bolt Manufacturing Company, Inc |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B201-003-20 |
Structure unique identifier | |
|---|
| Structure name | GDB |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | 3 |
|---|
| Heat Number(s) | 62149465
6214709305
198520 |
Nut Mfg. Lot Number(s) | 31836-6214709305 |
|---|
| Washer Mfg. Lot Number(s) | D7916 |
Bolt Specification | ASTM F3125 - 15 Grade A490 Type 3 |
|---|
| Bolt Length(s) | 3-1/4" |
Nut Specification | ASTM A563 Heavy Hex Nut, Grade DH3, Plain |
|---|
| Washer Specification | ASTM F436 Type 3 |
Finish | Geomet |
|---|
| Diameter/Size | 1-1/4" |
Bolt Mfg. Lot Number | 57451-1 |
|---|
| Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2020-02-13-8-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/03/2020 | spaine | Yes | 03/04/2020 | Nut Proof Load |
|
| 2020-02-13-8-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/03/2020 | spaine | Yes | 03/04/2020 | Nut Proof Load |
|
| 2020-02-13-8-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/04/2020 | Steven Paine | Yes | 03/04/2020 | |
|
| 2020-02-13-8-4 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/04/2020 | Steven Paine | Yes | 03/04/2020 | |
|
| 2020-02-13-8-5 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/04/2020 | Steven Paine | Yes | 03/04/2020 | |
|
| 2020-02-13-8-6 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/04/2020 | Steven Paine | Yes | 03/04/2020 | |
|
| 2020-02-13-8-7 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/04/2020 | Steven Paine | Yes | 03/04/2020 | |
|
| 2020-02-13-8-8 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/04/2020 | Steven Paine | Yes | 03/04/2020 | |
|
| 2020-02-13-8-9 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/04/2020 | Steven Paine | Yes | 03/04/2020 | |
|
| 2020-02-13-8-10 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/04/2020 | Steven Paine | Yes | 03/04/2020 | |
|
77365773667741177412774137741477415774167741777418
