Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2019-12-30-1

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 88888
DEA: SMTL-STOCK
EFIS: SMTL-STOCK
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date12/30/2019 Sample Unique Key1
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing01/03/2020
Sample typeQuality Assurance A brief description of the sample1-1/2” x 42” Anchor Bolt Assy.
The quantity of what the sample constitutes3 From where was the sample collectedSource
First name of sampler or witnessed byNicholas Last name of sampler or witnessed byHoffmann
Title of samplerQA Inspector Telephone number of sampler5105429827
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameAM Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormL124-34-19 Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s)3090238 Nut Mfg. Lot Number(s)DEBH
Washer Mfg. Lot Number(s)314551 Bolt SpecificationA52955
Bolt Length(s)42” Nut SpecificationA153 F2329
Washer SpecificationA568 FinishHDG MG
Diameter/Size1-1/2” Bolt Mfg. Lot Number
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2019-12-30-1-1ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory01/13/2020spaine
Yes
01/16/2020
2019-12-30-1-2ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory01/13/2020spaine
Yes
01/16/2020
2019-12-30-1-3ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory01/14/2020spaine
Yes
01/16/2020Nut Proof Load
2019-12-30-1-4ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory01/14/2020spaine
Yes
01/16/2020Nut Proof Load
2019-12-30-1-5ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory01/15/2020Steven Paine
Yes
01/16/2020
2019-12-30-1-6ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory01/15/2020Steven Paine
Yes
01/16/2020
2019-12-30-1-7ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory01/15/2020Steven Paine
Yes
01/16/2020
2019-12-30-1-8ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory01/15/2020Steven Paine
Yes
01/16/2020
2019-12-30-1-9ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory01/15/2020Steven Paine
Yes
01/16/2020
2019-12-30-1-10ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory01/15/2020Steven Paine
Yes
01/16/2020

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2019-12-30-1-1 ASTM A370-15 (Verified)
DIME Test ID: 2019-12-30-1-2 ASTM A370-15 (Verified)
DIME Test ID: 2019-12-30-1-3 ASTM F606-14a (Verified)
DIME Test ID: 2019-12-30-1-4 ASTM F606-14a (Verified)
DIME Test ID: 2019-12-30-1-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-30-1-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-30-1-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-30-1-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-30-1-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-30-1-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-30-1-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-30-1-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-30-1-13 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-30-1-14 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-30-1-15 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-30-1-16 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-30-1-17 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-30-1-18 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-30-1-19 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-30-1-20 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-30-1-21 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-30-1-22 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-30-1-23 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-30-1-24 ASTM E18-15 (Verified)
DIME Test ID: 2019-12-30-1-25 ASTM E18-15 (Verified)