Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2019-11-13-40
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 213738 DEA: 07303504 EFIS: 0714000007 |
|---|---|
| DIST-CO-RTE-PM | 07-VEN-23-0.0/R3.3 |
| Award Date | 01/09/2019 |
| Closeout Date | 11/02/2020 |
| Work Description | COLD PLANE & OVERLAY ASPHALT CONCRETE PAVEMENT AND UPGRADE CURB RAMPS. |
| Location Description | VENTURA COUNTY IN THOUSAND OAKS FROM CARLISLE ROAD TO ROUTE 101 |
| QA Service Level | 1 (Verified on 11/02/2020) |
Sample Information
| Sample Taken Date | 11/13/2019 | Sample Unique Key | 40 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/14/2019 |
| Sample type | Department Acceptance | A brief description of the sample | 1/2 RHMA-G-SP |
| The quantity of what the sample constitutes | 3 Bulk Bags | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Michael | Last name of sampler or witnessed by | Brook |
| Title of sampler | QC | Telephone number of sampler | |
| Laboratory sample identification | 8836-8838 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Vulcan Sun Valley | Transportation Laboratory (TL) Number | C923382-C923384 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Vulcan Sun Valley |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 1/2 RHMA-G-SP | The fabricator/manufacturer designation for the sample | 326120 SV3 LTR |
| The plant number | 3 | A detailed description of where the material sample was collected | Belt Cut at Vulcan Sun Valley at 307 tons |
| Where the material sample would have been placed if not sampled | Route 23 | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2019-11-13-40-1 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Sebastian Ferrer, Edmond Jabbour, CT D08 - Fontana Southern Regional Laboratory | 11/18/2019 | Michael Magana | No | Sand from Bin #1 (Lab #8836) | Info | |
| 2019-11-13-40-2 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Michael Magana, CT D08 - Fontana Southern Regional Laboratory | 11/18/2019 | Michael Magana | No | 3/8 Bin #2 (Lab #8837) | Info | |
| 2019-11-13-40-3 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Sebastian Ferrer, CT D08 - Fontana Southern Regional Laboratory | 11/21/2019 | Michael Magana | No | 1/2 Bin #3 (Lab #8838) | Info | |
| 2019-11-13-40-4 | CTM 217-June 2011: Method of Test for Sand Equivalent | Edmond Jabbour, CT D08 - Fontana Southern Regional Laboratory | 11/19/2019 | Michael Magana | No | Sand from Bin #1 (Lab #8836) | Info | |
| 2019-11-13-40-5 | CTM 227-December 2014: Method of Test for Evaluating Cleanness of Coarse Aggregate (Cleanness) | Juan Le Roy, CT D08 - Fontana Southern Regional Laboratory | 11/19/2019 | Michael Magana | No | 3/8 Bin #2 (Lab #8837) | Info | |
| 2019-11-13-40-6 | CTM 227-December 2014: Method of Test for Evaluating Cleanness of Coarse Aggregate (Cleanness) | Juan Le Roy, CT D08 - Fontana Southern Regional Laboratory | 12/19/2019 | Michael Magana | No | 1/2 Bin #3 (Lab #8838) | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2019-11-13-40-1 CTM 202-November 2011
DIME Test ID: 2019-11-13-40-2 CTM 202-November 2011
DIME Test ID: 2019-11-13-40-3 CTM 202-November 2011
DIME Test ID: 2019-11-13-40-4 CTM 217-June 2011
DIME Test ID: 2019-11-13-40-5 CTM 227-December 2014
DIME Test ID: 2019-11-13-40-6 CTM 227-December 2014