Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2019-12-04-7
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 214329 DEA: 120S2404 EFIS: 1220000002 |
DIST-CO-RTE-PM | 12-ORA-91-6.42/6.5 |
Award Date | 08/19/2019 |
Closeout Date | Not set |
Work Description | repair a damage steel girder by heat straightening as a result of a high load vehicle hit |
Location Description | Westbound Route 91 at La Palma Avenue Bridge Structure at PM 6.42 |
QA Service Level | 1 (Verified on 08/15/2019) |
Sample Information
Sample Taken Date | 12/04/2019 |
Sample Unique Key | 7 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 12/09/2019 |
Sample type | Quality Assurance |
A brief description of the sample | 3/4"-10 x 1-3/4" F3125 |
The quantity of what the sample constitutes | 47 |
From where was the sample collected | Other |
First name of sampler or witnessed by | Kenneth |
Last name of sampler or witnessed by | Varela |
Title of sampler | Associate Steel Inspector |
Telephone number of sampler | (562) 440-7716 |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Unytite Inc |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | L08-067-19 |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
Heat Number(s) | 10614270 |
Nut Mfg. Lot Number(s) | 30972-6214981603 |
Washer Mfg. Lot Number(s) | D7398 |
Bolt Specification | ASTM F3125 |
Bolt Length(s) | 1-3/4 |
Nut Specification | ASTM A563 Gr. DH |
Washer Specification | ASTM 436 |
Finish | MG |
Diameter/Size | 3/4"-10 |
Bolt Mfg. Lot Number | 30840-10614270 |
Rocap Test Requirement(s) | Yes |
Lubricant Requirements(s) | Yes |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2019-12-04-7-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 12/10/2019 | spaine | Yes | 12/11/2019 | Nut Proof Load | |
2019-12-04-7-2 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 12/10/2019 | Fred Saylor | Yes | 12/11/2019 | | |
2019-12-04-7-3 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 12/10/2019 | Fred Saylor | Yes | 12/11/2019 | | |
2019-12-04-7-4 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 12/10/2019 | Fred Saylor | Yes | 12/11/2019 | | |
2019-12-04-7-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 12/10/2019 | Fred Saylor | Yes | 12/11/2019 | | |
2019-12-04-7-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 12/10/2019 | Fred Saylor | Yes | 12/11/2019 | | |
2019-12-04-7-7 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 12/10/2019 | Fred Saylor | Yes | 12/11/2019 | | |
2019-12-04-7-8 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 12/10/2019 | Fred Saylor | Yes | 12/11/2019 | | |
7352073578735797358073582735837358473585