Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2019-12-04-2

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214329
DEA: 120S2404
EFIS: 1220000002
DIST-CO-RTE-PM12-ORA-91,90-6.42/6.5, 6.42
Award Date07/23/2019
Closeout DateNot set
Work Descriptionrepair a damage steel girder by heat straightening as a result of a high load vehicle hit
Location DescriptionWestbound Route 91 at La Palma Avenue Bridge Structure at PM 6.42
QA Service Level1 (Verified on 08/15/2019)

Sample Information

Sample Taken Date12/04/2019 Sample Unique Key2
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing12/09/2019
Sample typeQuality Assurance A brief description of the sample3/4"-10 x 4-3/4" A325
The quantity of what the sample constitutes64 From where was the sample collectedOther
First name of sampler or witnessed byKenneth Last name of sampler or witnessed byVarela
Title of samplerAssociate Steel Inspector Telephone number of sampler(562) 440-7716
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameNucor Fastener Division Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormL08-067-19 Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)373512AR
Heat Number(s)NF15204190 Nut Mfg. Lot Number(s)425734B
Washer Mfg. Lot Number(s)317650 Bolt SpecificationASTM A325
Bolt Length(s)4-3/4" Nut SpecificationASTM A563 Gr. DH
Washer SpecificationASTM 436 FinishHDG
Diameter/Size3/4"-10 Bolt Mfg. Lot Number373512A
Rocap Test Requirement(s)Yes Lubricant Requirements(s)Yes

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2019-12-04-2-11ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory12/10/2019Fred Saylor
Yes
12/11/2019
2019-12-04-2-12ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory12/10/2019Fred Saylor
Yes
12/11/2019
2019-12-04-2-13ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory12/10/2019Fred Saylor
Yes
12/11/2019
2019-12-04-2-14ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory12/10/2019Fred Saylor
Yes
12/11/2019
2019-12-04-2-15ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory12/10/2019Fred Saylor
Yes
12/11/2019
2019-12-04-2-16ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory12/10/2019Fred Saylor
Yes
12/11/2019
2019-12-04-2-17ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory12/10/2019Fred Saylor
Yes
12/11/2019
2019-12-04-2-18ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory12/10/2019Fred Saylor
Yes
12/11/2019
2019-12-04-2-19ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory12/10/2019Fred Saylor
Yes
12/11/2019

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2019-12-04-2-1 ASTM F606-14a (Verified)
DIME Test ID: 2019-12-04-2-2 ASTM F606-14a (Verified)
DIME Test ID: 2019-12-04-2-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-04-2-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-04-2-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-04-2-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-04-2-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-04-2-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-04-2-9 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-10 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-11 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-12 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-13 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-14 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-15 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-16 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-17 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-18 ASTM E18-15 (Verified)
DIME Test ID: 2019-12-04-2-19 ASTM E18-15 (Verified)