Sample Record
Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2019-12-04-2
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 214329 DEA: 120S2404 EFIS: 1220000002 |
---|---|
DIST-CO-RTE-PM | 12-ORA-91,90-6.42/6.5, 6.42 |
Award Date | 07/23/2019 |
Closeout Date | Not set |
Work Description | repair a damage steel girder by heat straightening as a result of a high load vehicle hit |
Location Description | Westbound Route 91 at La Palma Avenue Bridge Structure at PM 6.42 |
QA Service Level | 1 (Verified on 08/15/2019) |
Sample Information
Sample Taken Date | 12/04/2019 | Sample Unique Key | 2 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/09/2019 |
Sample type | Quality Assurance | A brief description of the sample | 3/4"-10 x 4-3/4" A325 |
The quantity of what the sample constitutes | 64 | From where was the sample collected | Other |
First name of sampler or witnessed by | Kenneth | Last name of sampler or witnessed by | Varela |
Title of sampler | Associate Steel Inspector | Telephone number of sampler | (562) 440-7716 |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Nucor Fastener Division | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | L08-067-19 | Structure unique identifier | |
Structure name |
Material Information
Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | 373512AR |
---|---|---|---|
Heat Number(s) | NF15204190 | Nut Mfg. Lot Number(s) | 425734B |
Washer Mfg. Lot Number(s) | 317650 | Bolt Specification | ASTM A325 |
Bolt Length(s) | 4-3/4" | Nut Specification | ASTM A563 Gr. DH |
Washer Specification | ASTM 436 | Finish | HDG |
Diameter/Size | 3/4"-10 | Bolt Mfg. Lot Number | 373512A |
Rocap Test Requirement(s) | Yes | Lubricant Requirements(s) | Yes |
Submitted Tests
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2019-12-04-2-1 ASTM F606-14a (Verified)
DIME Test ID: 2019-12-04-2-2 ASTM F606-14a (Verified)
DIME Test ID: 2019-12-04-2-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-04-2-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-04-2-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-04-2-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-04-2-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-04-2-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-12-04-2-9 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-10 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-11 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-12 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-13 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-14 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-15 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-16 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-17 ASTM B499-14 (Verified)
DIME Test ID: 2019-12-04-2-18 ASTM E18-15 (Verified)
DIME Test ID: 2019-12-04-2-19 ASTM E18-15 (Verified)