Sample Record

Owner Lab

  • Trinity Engineering Laboratories, Inc. - Fresno

DIME Sample ID 2019-10-29-30

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214136
DEA: 010F3604
EFIS: 0115000115
DIST-CO-RTE-PM01-HUM-101-R39.2/R48.3
Award Date07/31/2019
Closeout Date01/04/2021
Work DescriptionCOLD PLANE AC PAVEMENT, RHMA OVERLAY, AND GUARDRAIL INSTALLATION.
Location DescriptionHUMBOLDT COUNTY NEAR REDCREST, PEPPERWOOD, AND STAFFORD FROM ENGLWOOD PARK UNDERCROSSING TO EEL RIVER BRIDGE AND OVERHEAD
QA Service Level1 (Verified on 06/24/2019)

Sample Information

Sample Taken Date10/29/2019 Sample Unique Key30
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing10/29/2019
Sample typeQuality Control A brief description of the sampleColdfeed
The quantity of what the sample constitutesJMF From where was the sample collectedManufacturer
First name of sampler or witnessed byMatt Last name of sampler or witnessed byHorn
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameMercer Fraser B Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-12-0002::SANDY PRAIRIE
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedCold Feed
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size1/2 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown HMA Design ID JMF3512-2019-142-19-213RHMA-SP

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2019-10-29-30-1AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Matthew HornTrinity Engineering Laboratories, Inc. - Fresno10/29/2019Matthew Horn
Yes
10/29/2019
2019-10-29-30-2AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Matthew HornTrinity Engineering Laboratories, Inc. - Fresno10/29/2019Matthew Horn
Yes
10/29/2019
2019-10-29-30-3AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Matthew HornTrinity Engineering Laboratories, Inc. - Fresno10/29/2019Matthew Horn
Yes
10/29/2019
2019-10-29-30-4AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Matthew HornTrinity Engineering Laboratories, Inc. - Fresno10/29/2019Matthew Horn
Yes
10/29/2019
2019-10-29-30-5ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Matthew HornTrinity Engineering Laboratories, Inc. - Fresno10/29/2019Matthew Horn
Yes
10/29/2019
2019-10-29-30-6AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Matthew HornTrinity Engineering Laboratories, Inc. - Fresno10/29/2019Matthew Horn
Yes
10/29/2019
2019-10-29-30-7AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Matthew HornTrinity Engineering Laboratories, Inc. - Fresno10/29/2019Matthew Horn
Yes
10/29/2019

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2019-10-29-30-1 AASHTO T335-09r13 (Verified)
DIME Test ID: 2019-10-29-30-2 AASHTO T96-02r10 (Verified)
DIME Test ID: 2019-10-29-30-3 AASHTO T176-08 (Verified)
DIME Test ID: 2019-10-29-30-4 AASHTO T304-11 (Verified)
DIME Test ID: 2019-10-29-30-5 ASTM D4791-10 (Verified)
DIME Test ID: 2019-10-29-30-6 AASHTO T85-13 (Verified)
DIME Test ID: 2019-10-29-30-7 AASHTO T84-14 (Verified)